Hey, the rear numberplate on my mini is a stick on one but its REALLY stuck on, ther is a bit round the edge that is coming off but id like to know if im gonna destroy the paint if i rip it off or is it on mountings? im gonna remove it because there is a lot of water collecting behind it and im worried about rust, cheers
Numberplate
Started by
turnipeater
, Mar 13 2005 07:56 AM
2 replies to this topic
#1
Posted 13 March 2005 - 07:56 AM
#2
Posted 13 March 2005 - 08:52 AM
Its the same as the side stripes , use a hot air gun or hot water to soften the glue .
#3
Posted 13 March 2005 - 01:05 PM
Try a bit of REALLY thin wire, and slip it over the back, and then slice the double sided tape with the wire like a cheese cutter!! works every time!
then there will be tape still stuck to the body work, i usualy get a scraper on it, but being VERY carefull not to cut into the body work!!
Rich
then there will be tape still stuck to the body work, i usualy get a scraper on it, but being VERY carefull not to cut into the body work!!
Rich
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users