2 replies to this topic

[Mini Type R]

I've just been trying to fit the rear frame and roll cage and am having trouble getting the holes to line up. I can only get 1 fixing where the roof rail meets the frame on both sides, the other hole is about half a hole out. I've got the same problem with the front of the door bars and only just got the back ones in at a dodgy angle. The only way I can see to get 2 bolts in is to drill one of the holes out. Has anyone else had this problem?

Also my frame is touching the roof on both sides, the edge that the head lining starts from, which makes adjusting the position of the frame difficult as it's practically wedged in posiiton. Is this a common problem?

Does anyone have a dimension for fitting the vtec frame as the dvd only gives one for the bike engine.

Thanks,

Richard

[z cars chris]

richard if you ring me i will go through it with you we do sometimes get problems with alignment in some cars at first
chris

[rustandoil]

Sorry to drag up a old topic but in my defence it goes to show i have searched before creating a new topic beside that Mini Type R has described the problems i have been suffering today perfectly
So Chris, expect a phone call from me in the next few days







edited to add photos

Edited by rustandoil, 26 August 2010 - 12:23 PM.