As the title says but how easy is it to do on a round nose? Also do they do a conversion kit with all braces etc?
Clubman Front End Conversion?
Started by
wayneb911
, Feb 19 2008 12:24 PM
10 replies to this topic
#2
minimadjonesy
-
- Members
-
- 6,417 posts
Crazy About Mini's
- Local Club: SMAC
Posted 19 February 2008 - 12:50 PM
Wayne, it's reletively easy if you go for a fibreglass flip front. Do a quick search as there are a few people on here who have already done it!
#3
wayneb911
-
- Members
-
- 180 posts
Mini Mad
Posted 19 February 2008 - 01:01 PM
Wayne, it's reletively easy if you go for a fibreglass flip front. Do a quick search as there are a few people on here who have already done it!
Thanks but what about if i want to keep steel panels?
#4
Geehawk
-
- Members
-
- 500 posts
Super Mini Mad
Posted 19 February 2008 - 01:04 PM
If you want it all steel complete with proper inner wings etc.. and all welded on then it makes little economic sense. It would cost you of £500+ on panels alone.
#5
wayneb911
-
- Members
-
- 180 posts
Mini Mad
Posted 19 February 2008 - 01:10 PM
If you want it all steel complete with proper inner wings etc.. and all welded on then it makes little economic sense. It would cost you of £500+ on panels alone.
What i was thinking was a steel flip front so would it be just wings and bonnet with brace bars etc??
#6
minimadjonesy
-
- Members
-
- 6,417 posts
Crazy About Mini's
- Local Club: SMAC
Posted 19 February 2008 - 01:12 PM
Sorry, should have been a little less specific! As long as you have a flip front it's easy! 
Steel or FG!
Steel or FG!
#7
wayneb911
-
- Members
-
- 180 posts
Mini Mad
Posted 19 February 2008 - 01:13 PM
Sorry, should have been a little less specific! As long as you have a flip front it's easy!
Steel or FG!
Sorry bout that. So would it be slam panel bonnet and wings then make hinges etc?
Edited by wayneb911, 19 February 2008 - 01:14 PM.
#8
Baldspeed Racing
-
- Members
-
- 1,194 posts
One Carb Or Two?
- Location: Southam
Posted 19 February 2008 - 01:43 PM
if you are gonna fit a steel flipfront you will only need the wings and front panel as the inner wings would get cut off etc
#9
wayneb911
-
- Members
-
- 180 posts
Mini Mad
Posted 19 February 2008 - 02:00 PM
if you are gonna fit a steel flipfront you will only need the wings and front panel as the inner wings would get cut off etc
Is this an easy conversion?
#10
Geehawk
-
- Members
-
- 500 posts
Super Mini Mad
Posted 19 February 2008 - 02:10 PM
Sorry, should have been a little less specific! As long as you have a flip front it's easy!
Steel or FG!
Sorry bout that. So would it be slam panel bonnet and wings then make hinges etc?
Slam panel,slam panel support, headlight panels, bonnet,wings and front panel if you want the whole lot and to keep a separate bonnet.
#11
wayneb911
-
- Members
-
- 180 posts
Mini Mad
Posted 19 February 2008 - 02:31 PM
Sorry, should have been a little less specific! As long as you have a flip front it's easy!
Steel or FG!
Sorry bout that. So would it be slam panel bonnet and wings then make hinges etc?
Slam panel,slam panel support, headlight panels, bonnet,wings and front panel if you want the whole lot and to keep a separate bonnet.
What sort of braces will the flip front need due to being steel?
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
