More Engine Bay Tidying
#1
Posted 04 March 2008 - 09:48 PM
#2
Posted 04 March 2008 - 09:52 PM
Otherwise looks a very nice job (better than mine)
#3
Posted 04 March 2008 - 09:53 PM
#4
Posted 04 March 2008 - 09:58 PM
and i have ordered silicone hoses both heater and the overflow is there any others also i have hooked all the spark leads together behind the grill where can i get a chrome fan blade?
#5
Posted 04 March 2008 - 10:01 PM
#6
Posted 04 March 2008 - 10:07 PM
#7
Posted 04 March 2008 - 10:07 PM
There is a guide on here somewhere, have a look
i did and thats how i got my engine to its state now
what things can be bought chrome?
#8
Posted 04 March 2008 - 11:09 PM
I think apart from that the only thing that i'd change woud be with the paint. Theres not enough contrast so it doesn't look as good as it could.
Get some silver hammerite and paint your alternator, clutch casing, coil bracket, heater valve and use black hammerite to repaint the top of your rad - Looks daft in gold. Also you could go abit further down with the silver paint on your clutch lines - Pant the cylinder.
Apart from those bits - Good job! You've made a good job of tidying the wiring up!
#9
Posted 05 March 2008 - 09:16 PM
so i will try and get if anyone could get me links to where i can get any of these i have looked and found rubbish or nothin
second air filter (twin carb soon)
two chrome dashpots
chrome dipstick
chrome fan blade
chrome radiator cowl
coil cover in chrome
things i have got comin throu post
3 blue silicones hoses
black leather for parcel shelf and speaker board
things i have recieved
spark plug cable spliters
chrome rad cap
#10
Posted 05 March 2008 - 09:44 PM
and if it was me i wouldn't go too overboard on chrome, i think if you start to have too much it gets a bit takcy looking but thats just my opinion
#11
Posted 05 March 2008 - 10:37 PM
i done some more work to the slam panel tyided it up alot more and going to wash whole engine down again and maybe put hoses on if there here tomo
#12
Posted 07 March 2008 - 09:59 AM
If you want a shiny coil,.. get some wire wool and some autosol,.. most coils (even old nasty ones) will come up like they've been chromed!
#13
Posted 07 March 2008 - 12:47 PM
Just a word in your ear,....Don't forget your coil needs to be kept as cool as possible,... Putting a can over it will cause the coil to break down a lot quicker due to the can insulating the coil, making it very hard for the heat created to disperse.
If you want a shiny coil,.. get some wire wool and some autosol,.. most coils (even old nasty ones) will come up like they've been chromed!
wow that was some really good advice much appriciated got a few things to do before i am able to get in mini world says mini world lol
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users