Hi all dose any one out there know of a quick and simple way of removing the gear selector roll pin it took me a good 1/2 hour 2day kinda had enough of it now!!!
Easy Removal?
Started by
minidj
, May 18 2008 08:18 PM
5 replies to this topic
#2
langers2k
-
- Members
-
- 419 posts
Speeding Along Now
- Location: East Anglia
Posted 18 May 2008 - 08:21 PM
Right sized punch?
Think I used an old drill bit when I did mine, just don't be scared to hit it!
Think I used an old drill bit when I did mine, just don't be scared to hit it!
#3
mini-geek
-
- Members
-
- 1,169 posts
One Carb Or Two?
- Location: Ormskirk
Posted 18 May 2008 - 08:24 PM
also put the car in reverse it will make it a lot easyer to get access to the front pin
#4
minimadjonesy
-
- Members
-
- 6,417 posts
Crazy About Mini's
- Local Club: SMAC
Posted 18 May 2008 - 09:14 PM
and if you had done a quick search you would have found this info in sooooo many other topics! Possibly even an FAQ!
#5
TheRestorer
-
- Noobies
-
- 69 posts
Stage One Kit Fitted
- Local Club: My club!
Posted 25 May 2008 - 11:23 AM
3/16'' roll pin punch, easy
#6
liirge
-
- Members
-
- 4,097 posts
Up Into Fourth
- Local Club: EDMC AND MMC
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
