Hi
I was working on my 1340 The carb is rebuilt. it Has a Stage 5 head wit 15. roller rockers a 286 cam.
A BCE needle was installed in the HIF 44 carb
I retimed the engine to 8 degrees BTDC but at present the car will idle albeit badly, but if you drive it need to keep the revs above 3 grand. If we fall below that the car stalls
The contacts have been set too .35 mm The Head was torqued to 50 pounds
any ideas
Rum
No Idle And Stalls
Started by
RumRunner
, Jun 24 2008 06:16 PM
No replies to this topic
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users