5 replies to this topic

[yeamini]

i was wondering if a mini in this state could be put threw a mot and and pass ? ive got my uncle as a welder when he has finished work and when he feels like doing it and helping me fit the stiff thats neaded so could this be done thanks ben

Attached Files

•  SP_A0224.jpg   15.06K   9 downloads
•  SP_A0226.jpg   13.89K   4 downloads

[E11OOT]

it's impossible to say whether it would pass it's MOT!

There and many other thing that it could fail on other than the general body work!

Edited by E11OOT, 08 July 2008 - 10:46 PM.

[james105]

a view from under it would help a little because we can't see anything important like subframes, subframe/ structural mounting mounts. From that view it could be a rat style mini, so everything is perfect underneath

[yeamini]

it's impossible to say whether it would pass it's MOT!

There and many other thing that it could fail on other than the general body work!

sorry lol the flour has 2little holes in the flour front sub is okay ...the rear isent to good still stiff but coulddo with a new one and rear break like on the sub could be renewed then new tryes and a mph clock shocks and im getting my uncle around tomorow for the wireing have a look ans test to see if there is any power coming threw the wires to see if they are nakerd or just switches, bulbs, conectors and then mixing fresh petrol in with the old and getting her fired up and going a mot next week sometime or week after that thanks ben

[Ouster]

*my brain hurts*
Check if the wiring, bulbs, washers etc work properly, there's no rust 30cm from structural points, the brakes record sufficient efficiency, and you'll be on your way to getting a pass.

Maybe. Stella dictates it so.

[Dan]

With no headlamp rim or rear bumper it's going to fail on sharp edges. And it has no number plates. Beyond that you can't tell anything from these pictures or your description that will influence an MOT.