Jump to content


Photo

Rover Coupe Seats


  • Please log in to reply
10 replies to this topic

#1 Jimmy Hat

Jimmy Hat

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 960 posts

Posted 21 August 2008 - 11:32 PM

Just wondering how much money I'd need to spend in order to fit these here seats http://cgi.ebay.co.u...id=p3286.c0.m14 nto my Mini? and does anybody know if the back seats would fit? And what subframes would I need to buy etc.
Thanks!

#2 lowandslow

lowandslow

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 359 posts
  • Local Club: east coast mini club

Posted 21 August 2008 - 11:43 PM

cost of fitting would depend if you are doing it or getting a garage/modding shop to do it. the only thing to check is how wide they are, if they are too wide you won't be able to use your hand brake. i had rover 800 vitesse recaro's in my mini and they fitted ok.

#3 Jimmy Hat

Jimmy Hat

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 960 posts

Posted 22 August 2008 - 12:00 AM

Well, I'd fit them, I was just wondering what subframes I'd need to get and whether they would still flip forwards etc, and whether the back seats would fit, but I dont think they would. I know there are Minis with rover coupe front seats fitted into them ok so they should fit.

Edited by Jimmy Hat, 22 August 2008 - 12:01 AM.


#4 tobiasnugent

tobiasnugent

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 763 posts

Posted 22 August 2008 - 12:08 AM

ask the guy to measure them for you
even looks like you coudl squeeze the back ones in!

#5 Jimmy Hat

Jimmy Hat

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 960 posts

Posted 22 August 2008 - 12:25 AM

Could do, probably no need, because i saw a set of fronts that were identical but half leather, which were advertised specifically as mini seats :thumbsup: but you think I could get the backs in? probably need some modification with the holes for the seatbelt buckles, I could just make the webbing longer so the buckles would go on the standard mounts but go through the holes in the new seats..
Oh yes and main thing is more info on subframes please!! its confusing.. thanks for all your help up to now though!!

Edited by Jimmy Hat, 22 August 2008 - 12:41 AM.


#6 tobiasnugent

tobiasnugent

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 763 posts

Posted 22 August 2008 - 12:28 AM

yer you could have a go will need some mods but looks do able. if they were closer to me i would of considered a nice bidding war with you :thumbsup:

#7 Jimmy Hat

Jimmy Hat

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 960 posts

Posted 22 August 2008 - 01:14 AM

yer you could have a go will need some mods but looks do able. if they were closer to me i would of considered a nice bidding war with you :thumbsup:


Oh yep thanks for that, well you cant have everything :thumbsup:

Hopefully nobody else will want them because to the untrained eye they look like junk...

#8 tobiasnugent

tobiasnugent

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 763 posts

Posted 22 August 2008 - 02:14 PM

they just need a good old clean

#9 roofman

roofman

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 57 posts

Posted 22 August 2008 - 03:21 PM

Is it me or do the front seats look too tall? For the backs , even if they dont fit, you could probably have an upholstery shot redo the covers for a mini seat.

#10 Jimmy Hat

Jimmy Hat

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 960 posts

Posted 22 August 2008 - 04:19 PM

Well, I asked him for measurements on the back seats, they're too wide :shifty: And i don't want to buy front and back seats if the back ones don't fit. I have seen a set of front Rover Coupe seats advertised specifically as being ideal for a Mini, so I assumed they'd fit... Would Metro seats fit in without any modifications?

Edited by Jimmy Hat, 22 August 2008 - 04:20 PM.


#11 Bristolboy

Bristolboy

    Mini Mad

  • Members
  • PipPipPipPip
  • 291 posts

Posted 24 August 2008 - 04:01 PM

Well, I asked him for measurements on the back seats, they're too wide :D And i don't want to buy front and back seats if the back ones don't fit. I have seen a set of front Rover Coupe seats advertised specifically as being ideal for a Mini, so I assumed they'd fit... Would Metro seats fit in without any modifications?


I believe i have metro seats. they fit alright. Quite comfy. But the springs in the back squeak on mine which can be annoying. Cant help you on the subframe front as they were alreay in the car when i was given it. They slide and tilt, although the screw bit for reclining and tilting can be tight to get at if you lean them right back as i do (if you get what i mean). You should be able to see them if you zoom on the pic below:



Bb

Attached Files






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users