#1
Posted 09 January 2020 - 06:09 PM
#2
Posted 09 January 2020 - 07:47 PM
Someone who knows more than me might come along but on my 91 cooper those mounts had bolts that came through on the boot side, they came in my new hardware kit so not sure why yours has studs, unless someone put something over the heads on the boot floor.
#3
Posted 09 January 2020 - 07:54 PM
It's not easy to replace the pins, but there's at least one post on here somewhere describing how it can be done
#4
Posted 10 January 2020 - 07:27 AM
#5
Posted 10 January 2020 - 08:14 AM
not a serviceable part.
subframe needs to come off to weld in a new pin or replace subframe.
#6
Posted 10 January 2020 - 09:45 AM
#7
Posted 10 January 2020 - 09:58 AM
Maybe re cut the thread smaller and use a smaller nut and a big washer ?
#8
Posted 10 January 2020 - 11:23 AM
New pins not available, however it can be repaired with some care, patience and skill.
There's a post on the board somewhere where this has been done.
Also tagged with one or more of these keywords: suspension
Mini Technical Sections →
Problems, Questions and Technical →
Mot Advisories On Potential PurchaseStarted by billlifferr , 12 Jun 2023 suspension |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Fitting 10” Wheels On My Mini Convertible (Spi)Started by Dalla , 29 May 2023 suspension, brakes |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Radius Arm - Reaming Or Beyond Repair?Started by Chelsea_Pete , 04 May 2023 suspension |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Correct Upper Suspension Arm Tightening Process?Started by Dakinn , 03 May 2023 suspension |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Track Rod End Thread Engagement / Adjustable Lower ArmsStarted by YankWithAMini , 02 May 2023 suspension |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users