27 replies to this topic

[Pavel]

Might be a silly question but have you checked if the bulbs are blown by any chance? Surely theres little chance of 6 of them blowing at the same time, but check anyway!

[Jules]

No its definately not the bulbs because the hazards work fine!!!!

[Dom]

thats rather odd.

[Jules]

Ok this is silly now its been 3 weeks or something and no indicators,
tried cleaning the earths, as minis84 said, nothing
taken the coloum off to see if there was something suspect there, no.
Changed the in-line fuse box, nothing.
What else could it be?? Need to get this sorted because its a pain in the arse

[Jules]

Guys Help

[Brawlyrox]

faulty indicator stalk?

[Jules]

Changed the whole thing and it still didn't work so knew it wasn't that. Really really stumped on this one, so i suppose i'l have to give it to someone who knows everything bout everything and pay them loads money!

[cowboy]

jules try the hazard warning switch, i had same problem but mine was other way round, i had indicators but no hazards, changed switch( wrong one) now have hazards, but no indicators, when i get new hazard switch should solve problem

[Jules]

That could explain a few things, because I bought new switch's, because they went grey!! I'l try that tonite!!!
Cheers :grin: :grin:
Jules x

[cowboy]

hope it works happy miniing :grin: :wales:

[Ben H]

Mmm, I have had simmilar problems in the past and just after restoring my mini the hazards stopped working. However from what I remember of the fuse box if the fuse is gone or making a bad connection then the side lights do not work either so that is an easy test. I changed my fuse box for the new blade type which is a very easy mod and is much much better.

The best thing to check if you have not done already is the hazard switch. When the hazards are on it removes the supply to the indicator stalks so the normal indicator circuit can not be operated. When you switch the hazards off the supply is restored and the hazard supply is isolated. Wether you follow that or not I am basically suggesting you try another hazard switch or at least check that it operates properly. If it has not been used for some time the contacts can become dirty and stop it working.

Ben

[Jules]

Thank you so much cowboy and Ben. Changed the switch over (back to my old one) and the indicators work!!!!!! :grin: I'm sooooooo happy!!!!!! Thought it was going to be something really really expensive . Now I can slow down for corners!!!!!! :grin: :saywhat:

[Dom]

:grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin: :grin:
sorted, well done chaps. job done.