Pc3 Usb Map For Mini Busa
#1
Posted 23 October 2007 - 07:51 AM
Any help would be appreciated
Steve
#2
Posted 23 October 2007 - 08:46 AM
Was much better than the stock map and the engine sounded instantly different as soon as we plugged it in.
http://www.powercomm...d...106&yr=2005
This should be the list you need
#3
Posted 23 October 2007 - 10:44 AM
Hi Ade,What I did with mine was look throught the list of maps on the power commander website and find one that looks close then go from there. Apparently when mine was mapped it was a reasonable starting point so not bad.
Was much better than the stock map and the engine sounded instantly different as soon as we plugged it in.
http://www.powercomm...d...106&yr=2005
This should be the list you need
Mine doesnt have a power commander, so consequently hasnt been mapped. Did it make a big difference?
Hilty
#4
Posted 23 October 2007 - 11:43 AM
Hi Ade,What I did with mine was look throught the list of maps on the power commander website and find one that looks close then go from there. Apparently when mine was mapped it was a reasonable starting point so not bad.
Was much better than the stock map and the engine sounded instantly different as soon as we plugged it in.
http://www.powercomm...d...106&yr=2005
This should be the list you need
Mine doesnt have a power commander, so consequently hasnt been mapped. Did it make a big difference?
Hilty
Yep! Huge difference in general drivability. Much more torque lower down and generally much smoother acceleration! Would deffo recommend it.
#5
Posted 23 October 2007 - 03:13 PM
Edited by markrally73, 23 October 2007 - 03:15 PM.
#6
Posted 23 October 2007 - 03:20 PM
i got a PC3 on mine mapped by holeshot racing to the same spec as yours but i aint go the lead to connect up to it so i cant get the info for you!!!
Mark.
Did you buy th pc3 from holeshot already mapped etc?
cheers
Hilty
#7
Posted 23 October 2007 - 04:25 PM
i got a PC3 on mine mapped by holeshot racing to the same spec as yours but i aint go the lead to connect up to it so i cant get the info for you!!!
Mark.
Did you buy th pc3 from holeshot already mapped etc?
cheers
Hilty
No, It was done when the car was built, i still got the rolling road printout that came with it. It also has a dynojet Quickshifter kit plugged into the PC3 aswell (which is nice!!)
I reckon it will need remapping now i have changed the exhaust and air filter
cheers
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users