Jump to content


Community Status Updates


Photo

Perrylawrence96

need someone's experties in essex on a SPI, oh.. and on how to remove a thermostat bolt out the block :D
Feb 17 2015 09:50 AM
  • Perrylawrence96's Photo
    Perrylawrence96
    head warping on a rover?! least its not uncommon (;
    Feb 18 2015 10:43 AM
  • AlexMozza's Photo
    AlexMozza
    have you got a welder? Could weld a nut on it.
    Failing that, giving the stud a good hard whack on the head with a mallet helps, in most cases it shifts the rust/ corrosion just enough to start turning the stud.
    Feb 18 2015 10:51 AM
  • Perrylawrence96's Photo
    Perrylawrence96
    the stud actually broke getting tightened up.. I didn't let it have time to corrode and WD-40'ed it straight away.. its just sealed proper
    Feb 18 2015 11:13 AM
Photo

Perrylawrence96

want a A45 AMG :(
Feb 17 2015 09:48 AM
Photo

BronkoMini

Three years to the day, that I first drove my mini, oh how I miss driving him.
Feb 17 2015 08:42 AM
  • Rustless's Photo
    Rustless
    Happy Birthday!
    Feb 17 2015 01:22 PM
  • BronkoMini's Photo
    BronkoMini
    Cheers!
    Feb 17 2015 01:23 PM
Photo

Steve220

Shouldn't mess around with epoxy resin. One fixed gauge surround, one stuck coffee mug to the desk. Arse.
Feb 16 2015 09:48 PM
  • M J W J's Photo
    M J W J
    I stuck a girl's car keys to a bench at college using epoxy resin once. I put just enough on the back of her keyring so you didn't immediately see it. It looked at though they were just sitting there but they were well and truly stuck.
    Feb 16 2015 10:23 PM
  • Miniminx71's Photo
    Miniminx71
    Your mug is singing to itself: 'Clowns to the left of me, jokers to the right, here I am, stuck in the middle with glue'
    Feb 17 2015 12:28 AM
  • Ben_O's Photo
    Ben_O
    :D
    Feb 17 2015 01:18 AM
Photo

MiniKermit

Started a Kermit Build Threat! only took 2 years!!!
Feb 16 2015 03:41 PM
  • MiniKermit's Photo
    MiniKermit
    Ahhhhhhh sorry missed that! Nope ur right it's not lol
    Feb 16 2015 03:49 PM
  • Miniminx71's Photo
    Miniminx71
    He he. (Looking good by the way).
    Feb 16 2015 03:54 PM
  • MiniKermit's Photo
    MiniKermit
    Thanks! He doesn't look so good at the moment!
    Feb 16 2015 04:02 PM
Photo

firstmini

over the moon... been meaning to check for ages and kept forgetting. I do not have over sills, 1 problem crossed off list!
Feb 16 2015 02:51 PM
  • Anthony30's Photo
    Anthony30
    YAY. :)
    Feb 16 2015 02:52 PM
  • firstmini's Photo
    firstmini
    Ha was as good news as insurance repairing her not writing her off! How sad?!
    Feb 16 2015 02:53 PM
Photo

Midas Mk1

Think I need a sit down, just got a quote from MED. Makes a type r conversion look cheap, bugger.
Feb 16 2015 02:39 PM
  • Artful Dodger's Photo
    Artful Dodger
    Try my bill for my mini7 engine and dog box! Stings!��
    Feb 16 2015 08:50 PM
Photo

a_woolhouse

Anyone know if you can legally tow a mini (on a trailer) with a 1.2 corsa C ? looking at getting my towing licence soon :)
Feb 16 2015 01:00 PM
  • robminibcy's Photo
    robminibcy
    https://www.gov.uk/towing-with-car/driving-licence-rules-and-what-you-can-tow
    Feb 16 2015 07:45 PM
  • Ben_O's Photo
    Ben_O
    I used my mates 1.2 punto to tow an old mini of mine on a single axle trailer. I only needed to tow it less than a mile and it wasn't very comfortable.
    Feb 17 2015 07:35 AM
  • SiZT's Photo
    SiZT
    Combined gross weight of 3.5 ton or under or 750kg gross trailer weight if over 3.5 ton. The towing weight for your car is ~900kgs, I think you'd struggle to get a trailer with a plated weight that low
    Feb 18 2015 02:12 PM
Photo

beaubrad

oooooh...get a day out to the scrap yard!.....my favorite type of shopping and with any luck picking up an engine
Feb 16 2015 11:40 AM
  • stevearch0's Photo
    stevearch0
    Ooh,heaven for me too.I'm babysitting instead :-(
    Feb 16 2015 12:21 PM
Photo

Chance

I hate the rain...im sure it waits for me to plan some work and then starts.
Feb 16 2015 10:56 AM
  • beaubrad's Photo
    beaubrad
    Ditto or its the wind while your trying to spray some primer!!!!
    Feb 16 2015 11:41 AM
  • 1984mini25's Photo
    1984mini25
    laying under the mini refitting the gear shifter in the rain is not my idea of fun, might have a shower or head off down the pool later to dry off, as its not like I can get any more soaked
    Feb 16 2015 12:27 PM
  • Chance's Photo
    Chance
    this wasnt a daily driver car thankfully so ill just do it another day...i once changed my front cones in the rain...your body soon numbs..i curse anyone with a workshop
    Feb 16 2015 05:56 PM
Photo

mr dirty money

Awaiting Parts...
Feb 16 2015 01:32 AM
Photo

Jared Mk3

Quite enjoying the new Passport. Mind you, not many people using them here . . .
Feb 15 2015 06:40 PM
  • Vinay-RS's Photo
    Vinay-RS
    Planning a trip to the UK for some mini spares? :)
    Feb 15 2015 07:02 PM
  • Jared Mk3's Photo
    Jared Mk3
    Nah haha, talking about the phone :)
    Feb 15 2015 07:11 PM
Photo

1984mini25

Damm, I was hoping my cheap imitation hammerite would have dried by now.
Feb 15 2015 01:40 PM
  • RossKnight's Photo
    RossKnight
    Agreed. All the 'metal' paints i've tried now takes ages to dry. and even then can still be tacky in places after a day or two.. Anyone actually found decent stuff?
    Feb 15 2015 06:59 PM
  • 1984mini25's Photo
    1984mini25
    anti-vandal paint, isn't that just underseal in a different tin?
    Feb 15 2015 09:20 PM
  • 1984mini25's Photo
    1984mini25
    Plus I was only using this stuff as the two half used tins of proper hammerite had both dried up solid. still the part/s I've painted live under the car anyways, I was just didn't want to end up with sticky black hands when it came to refitting everything
    Feb 15 2015 09:24 PM
Photo

Anthony30

Not feeling very enthusiastic about going to the gym tomorrow morning. 09:30 start.
Feb 14 2015 09:50 PM
  • 1984mini25's Photo
    1984mini25
    my excuse for having a week off is pool + half team = far too many snotty nosed kids for my liking.
    Feb 15 2015 12:11 PM
  • Anthony30's Photo
    Anthony30
    Just got back. Doing it again next week. :)
    Feb 15 2015 12:52 PM
  • Miniminx71's Photo
    Miniminx71
    Good for you. Going to the gym can get addictive. Especially when you start seeing/feeling the results :-)
    Feb 15 2015 10:20 PM
Photo

tomb1992

any tips/ ideas on how i can trim my Fiberglass archeswant to remove lip off old group 2 wide arches. thanks
Feb 14 2015 08:26 PM
  • BronkoMini's Photo
    BronkoMini
    I used a dremel to trim mine
    Feb 14 2015 09:19 PM
  • tomb1992's Photo
    tomb1992
    cheers guys! will borrow one for an evening.
    Feb 14 2015 10:00 PM
  • BronkoMini's Photo
    BronkoMini
    Just be carful not to take to much off
    Feb 14 2015 10:23 PM