Community Status Updates
This status update has reached the maximum number of replies allowed
Cunnymonster
My gearbox is attached to the engine again!! Now to put it all back in the car! :O
Oct 16 2013 05:15 PM
h_boy
quick Q. Do all mini come standard with sealed beam headlights? Without wanting to sound stupid what the difference between sealed and non sealed?
Oct 16 2013 03:16 PM
-
HarrysMini
Sealed beam headlights have no bulbs, just a filament. The whole light unit acts as a bulb.
Oct 16 2013 04:14 PM -
h_boy
I see. I knew it would just be as basic as it sounds. thanks for the help.
Oct 16 2013 04:31 PM
-
sherly
Good luck! Confident of a pass.....?
Oct 16 2013 12:33 PM -
megamini_jb
How'd it do?
Oct 16 2013 04:51 PM -
littlemissmagic
It failed. But on the upside not from much and nothing that cant be fixed with a days work. Im confident that it will pass when it goes back :) cant wait to get driving it. Its so low!
Oct 16 2013 07:18 PM
-
iMurray
I JUST CAN'T STOP
Oct 15 2013 08:54 PM -
Artful Dodger
DOING THE FLOP
Oct 15 2013 08:56 PM -
Stiggytoo
THE DING DONG FLOP
Oct 16 2013 07:01 AM
iMurray
bleary eyed he walks from the Cave. entering into which that is tmf once more.
Oct 15 2013 08:29 PM
-
iMurray
Spaaaaaaaaarrrrr. Corner shop
Oct 15 2013 08:48 PM -
Artful Dodger
what?
Oct 15 2013 08:50 PM -
Artful Dodger
BACK TO SPAM
Oct 15 2013 08:50 PM
dan187
mini shell for sale... http://www.ebay.co.uk/itm/321223511050?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Oct 15 2013 06:51 PM
minilee94
Will a standard oil filter housing e okay to use on a 1380 fast road producing 100+ bhp
Oct 15 2013 06:33 PM
-
Artful Dodger
also, would be a good idea to flow the spin on type housing, there is alot of casting left in there after manufacturing because they arnt machined at all. in the oil feed in the middle, make it as flowey as possible. i think i put some pictures of what i did to mune on my build thread for t clubman
Oct 15 2013 07:09 PM -
minilee94
Okay cheers and yeah spin on type yeah erm I copied you by drilling the holes in the housing I liked the look ad I was going to use a braided hose coming from the filter housing to a cooler il take a look at your thread
Oct 15 2013 07:12 PM -
Artful Dodger
i just looked through, i havnt. if you look at the back where it mounts to the block and under neath through the hole with the thread on it the two chanels join that feeds the oil to the filter. this can be ported and made alot smoother for better oil flow:) also the return hole is very small, take this out as much as possible
Oct 15 2013 08:43 PM
cooperlooper
Wrong bearings from eurocarparts now got56 million mile drive to Truro to get the right ones ggrrr
Oct 15 2013 05:35 PM
-
alex-95
I was just going to say go to mill auto
Oct 15 2013 06:00 PM -
patricksouth
Mill autos rule bit euro car parts offer a 25% tmf discount....and every little helps
Oct 15 2013 06:06 PM -
cooperlooper
Mill want nearly40 quids a set !!!
Oct 15 2013 06:56 PM
Cunnymonster
Just recieved an order from Minisport, Totally different item to whats advertised on the site and totally different to whats advertised on the box.....
Oct 15 2013 04:15 PM
-
HarrysMini
Some indicators that were advertised as glass but were actually plastic, and some Timken rear wheel bearings.. they sent me the cheapo Chinese things and refuse to exchange/refund!
Oct 15 2013 04:35 PM -
Cunnymonster
OOh i Ordered the Prospark Fast road HT leads and appear to have recieved the Cheaper "intermotor" Version...
Oct 15 2013 04:37 PM -
minilee94
My mate bought some green alloy brakes calipers as shown in mini mag there lime green ish and they sent dark green instead and wen he told them they were tryna throw things in the way of him sending them back and changing them
Oct 15 2013 04:56 PM
-
MiniGrin
hahahahaha, what!!!
Oct 15 2013 07:45 PM -
danm
http://www.theminiforum.co.uk/forums/topic/261025-garage-flooded-council-compensation-total-your-damage-costs-please/
Oct 16 2013 01:15 PM
