Community Status Updates
This status update has reached the maximum number of replies allowed
-
HarrysMini
http://www.guess-works.com/Shop/Gearbox/
Jul 11 2014 07:09 PM
-
the_samkingdon15
hijack....... how much man?
Apr 15 2014 09:11 PM -
HarrysMini
http://www.theminiforum.co.uk/forums/topic/279825-mostly-welded-1993-shell/
Apr 15 2014 09:21 PM -
Archived4
Cheers! Lol
Apr 15 2014 09:30 PM
-
HarrysMini
yep ^
Apr 15 2014 03:51 PM -
the_samkingdon15
the bastard is right ^
Apr 15 2014 06:33 PM -
lukepilot
I tried to do that mate, it is a very hard thing to find.
Apr 15 2014 06:35 PM
spraymaster
What's is the length of the middle section exhaust straight through the middle
Nov 08 2013 06:36 PM
-
'Chop'
Long enough to reach between the LCB and the rear silencer!! Although seriously I can measure mine if you want :)
Nov 08 2013 09:01 PM -
sixtyeight
I have one here to suit a twin pipe fletcher - its about 135cm
Nov 08 2013 09:36 PM
-
MrJamJar
Minispares have one on sale at the minute. Side fitting for £133.88. Failing that, there may be some on Ebay? :)
Aug 13 2013 10:46 PM -
Noah
Or use a C-ARA4442 from Mini Spares. 2 Core Sorted.
Cheaper.
Aug 13 2013 11:02 PM -
spraymaster
cheers guys
Aug 14 2013 03:59 PM
spraymaster
how do i know what clutch kit to get on my 1992 1275 without taking it apart
Apr 16 2013 05:32 PM
-
KernowCooper
1992 should be verto with the short clutch arm
Apr 16 2013 05:39 PM -
spraymaster
spoke to mini spares he said theres a 180 sumthink or a 190
Apr 16 2013 05:44 PM -
KernowCooper
190mm is 1990 and SPI cars onwards but the larger cab be fitted to the 180mm setup if the flywheel is 100% sufface perfect, if in doubt its a strip down
Apr 16 2013 05:49 PM
-
spraymaster
tried to remove it took carb off and alternator the rad is a nightmare all the bolts rounded off and dont know where to start unbolting the subframe
Mar 02 2013 09:33 PM -
Shifty
Undo the single bolt at the bottom of the rad, it lifts straight out.
Mar 02 2013 10:44 PM -
spraymaster
cheers shifty
Mar 02 2013 11:03 PM
