35 replies to this topic

[Bounce]

I think its been two years now since I started the original 'Operation: Nancy' thread in the Honda conversions section. And after those two year of inactivity due to work commitments/restraints, Ive organised for a very kind man to build it for me.

And the reason its in here is because she (Nancy) is becoming a Zcar!




Why cant you cheer and stuff on the web??


Please bear with me withst I compile a brief photo history of this 'Operation' so far

[Bounce]

This is/was Nancy in 2006.


This is me with Nancy in 2006.


An engine on its way to Nancy.



An engine in bits.

[Bounce]

First attempt to remove the crank pulley bolt.



Cheap tools are cheap for a reason.

Trying to disypher the looms that came with the engine


Second attempt at removing the crank pulley bolt



Ignore the Harrier weapons pylon at the back of the desk. I wasnt shirking off work to dismantle my engine, honest.

Third attempt. This time with a 3' breaker bar, screwdriver locking off the flywheel, 1" drives and 5 mates.


Dismantling continues...

[Bounce]

The only workspace i had at the time


Then I found something better





Then I get posted to Northern Ireland and that nice workspace has to be abondoned and the project put on hold. All until a very nice man agrees to help me out.






And I think thats everyone caught up now. Thank you for looking.

[Bec]

Then I get posted to Northern Ireland and that nice workspace has to be abondoned and the project put on hold. All until a very nice man agrees to help me out.

Four very nice men helped Nancy out that day I like how you've tried to get the pictures life-size so it feels like we're actually there with you.

So when's Nancy's Z-cars conversion completion date?

[Bounce]

The completion date is hopefully going to be spring '09 bar finishing touches.

I dont know what happened with the last few pictures, photobucket must like them and decided you needed to see them that big.

[Bounce]

Oh yea. How could I forget??


The frame

Attached Files

•  nancey.jpg   95.04K   125 downloads

[biggav]

poor nancy!!! having all her bits fiddled with!!! still, she'll look, and feel better for it!

[JOEMACCA51]

The completion date is hopefully going to be spring '09 bar finishing touches.

I dont know what happened with the last few pictures, photobucket must like them and decided you needed to see them that big.

haha, looks like its going to be a great project!

[The Matt]

BOOOOOOOOOOOOOO! Nancy's going to be quicker than the FReaK at the 'ring next year! That sucks

Carry on

[79flyingturd]

nuts!

[monsterer]

I take it these frames are a reality now, then? I saw a post last year about zcars planning to make b16 and b18 RWD frames but then it went silent...

[THE STIG]

I take it these frames are a reality now, then? I saw a post last year about zcars planning to make b16 and b18 RWD frames but then it went silent...

this is a vtec frame i have to change the engine mounts etc

they are building one at the minute best to speak to z cars themselfs

[monsterer]

I take it these frames are a reality now, then? I saw a post last year about zcars planning to make b16 and b18 RWD frames but then it went silent...

this is a vtec frame i have to change the engine mounts etc

they are building one at the minute best to speak to z cars themselfs

B16 and B18 are vtec, aren't they?

[THE STIG]

I take it these frames are a reality now, then? I saw a post last year about zcars planning to make b16 and b18 RWD frames but then it went silent...

this is a vtec frame i have to change the engine mounts etc

they are building one at the minute best to speak to z cars themselfs

B16 and B18 are vtec, aren't they?

ok this is the standard type r k20 vetc frame