mirage motorsports manifold pics
Started by
benjamin
, Jul 14 2005 10:58 AM
9 replies to this topic
#1
Posted 14 July 2005 - 10:58 AM
does anyone have any pics of this setup with the t2 on there mini, im thinking of going this way when i turbo my motor but would like some pics. is there anywhere that you can get them second hand as 350pounds + postage to australia is gonna cost heaps
#2
Posted 14 July 2005 - 01:43 PM
http://www.turbo-min...3373/index.html?
Try www.turbominis.co.uk , if you haven't already. There are a few people running mirage kits phil (link above) being one of them
Wil
Try www.turbominis.co.uk , if you haven't already. There are a few people running mirage kits phil (link above) being one of them
Wil
#3
Posted 14 July 2005 - 11:56 PM
are there any second hand ones about
#4
Posted 18 July 2005 - 07:37 AM
or does anyone have one that they could take measurments of
i have mad a t2 flange so i just need to know :
inside pipe diameter
the angle that the pip comes out of the flanges on the exhaust ports
distance from top of the middle exhaust flange to t2 flange
if anyone could please measure this that would be great
i have mad a t2 flange so i just need to know :
inside pipe diameter
the angle that the pip comes out of the flanges on the exhaust ports
distance from top of the middle exhaust flange to t2 flange
if anyone could please measure this that would be great
#5
Posted 29 July 2005 - 11:13 AM
ok dont worry bout this im making my own custom one but could i see some pics of people t2 instalations thanks this woulb be great , turbo phil im sure you could help me
#6
Posted 29 July 2005 - 01:43 PM
I'm not actually using the mirage kit, as i sold it. I'm using a T2 but this is fitted to the Metro Turbo manifold using an adaptor i made. I have some photos of this if you want ?
Phil.
Phil.
#7
Posted 29 July 2005 - 02:42 PM
How did you get the exhaust On the turbo? and i thought there was problems fitting up the waterways on a T2?
#8
Posted 31 July 2005 - 06:30 AM
yeh that would be great thanksI'm not actually using the mirage kit, as i sold it. I'm using a T2 but this is fitted to the Metro Turbo manifold using an adaptor i made. I have some photos of this if you want ?
Phil.
#9
Posted 03 August 2005 - 02:03 PM
Here you go, this is the adaptor plate. The hole is tapered to allow smooth flow of the gases from the larger T3 manifold into the smaller T2 Turbo.
Attached Files
Edited by Turbo Phil, 03 August 2005 - 02:05 PM.
#10
Posted 03 August 2005 - 02:07 PM
Pic 2 shows the adaptor fastened to the manifold.
Attached Files
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users