
The Build
#16
Posted 14 December 2008 - 01:10 AM
#17
Posted 14 December 2008 - 01:22 PM
Did some real work today and it was GREAT!
Weather was good all morning so i decided to do some panel work, not much but it's better than cleaning any day

Pretty much just used some fibre glass to close up the rust holes in the floor and the aerial hole.
Then beat some dents on the fender, slapped on some putty and got the long block out... Then the weather got crappy and was invited to a braai... So i just gave it some black aerosol to protect from the elements and now i'm done for the day. I estimate(if there are no nasty surprizes) that all the bodywork should be top notch by thursday. Then i'm off to rent a comp and 2K the living s*&! out of her. Super excited but there is still alot more cleaning to do, got the grinder in the boot, cleaned up the speaker holes that some tard butchered and just removed the bit of wiring out the back. While i was busy with that the missus got stuck in with a wire brush on the interior(god bless her) so it's all looking good. Productive day.
On the downside... I haven't slept in 24 hours, still lots of work left, and i'm going to be hanging on the morrow.
Plus side... Progress, sun burn, 14h00 to 22h00 shift, amazing g/f, and besides the P80 marks the fender looks good, oh and i'm going to be hungover tomorrow!
Well here be the pics:

All sprayed, by no means finished but some good results

Clean(er) boot and primed up holes
That's all from me, hope everybody is having a great sunday.
Peace out.
Sod
#18
Posted 14 December 2008 - 08:00 PM

#19
Posted 15 December 2008 - 02:42 PM
1. Entirely black(super shiny) with loads of bright chrome.
2. A dark red with black roof and black stripes with loads of chrome.
I'm not sure... Black will be alot of effort as i will have to make sure that the bodywork is completely and utterly perfect so nothing shows... Red will hide small imperfections.
I think once the car is primed and flatted then i'll decide on the colour. Black I hope

#20
Posted 15 December 2008 - 03:43 PM
#21
Posted 15 December 2008 - 04:52 PM
A black car with black vinyl and no A/C, under the african sun. HOT!
Well whatever colour it is, it will be awesome. You see a couple of minis around here, but i've never seen 1 in good nick. They're all mistreated rust buckets. It's a shame.

But mine shall rock hard tasty abs!
#22
Posted 16 December 2008 - 09:55 PM
Going to go look at a compressor tomorrow... Can't wait... Should speed things up nicely.
Get to clean the car with ease now and prime at my own leasure instead of renting a comp and limiting the work i can do.
So super stoked right now!!!
Expect updates tomorrow... With pics.
Peace out
Sod
#23
Posted 16 January 2009 - 03:35 PM
Hope the festive was good and the new year has been prosperous to you all

Now that some time and money has freed up somewhat i managed to finally get busy on the car today, and there was alot of progress...
Well, since the last update it rusted ALOT, due to me not covering bare metal before the holiday

So, i started off by removing all the rust that i caused

Then i fixed 2 dents in the RHS rear quarter panel.
Then i fixed the RHS front fender.
And started fixing the right fender all over again... You'll notice the black paint on that fender in some pictures on here... Even when it's all scuffed up nothing sticks to it, not primer, not putty, nothing... So i started fresh and it should be all finished by tomorrow.
Then it's flatting and priming the whole car.
THEN I SPRAY!!! Woohoo!!!
Colour is decided. Alpine white with black roof and stripes

Also got quotes for all the accessories i need, the mechanical stuff and upholstery.
Things are coming along nicely and i am now super stoked!
Rear dents fixed and primed
Front fender
Floor plus seat
Das boot!
Thanks for reading.
Comment comment comment

#24
Posted 16 January 2009 - 04:23 PM
0-60mph 25.5 seconds

#25
Posted 16 January 2009 - 04:29 PM

Still, not much better... The performance will come... In time

#26
Posted 19 January 2009 - 11:00 PM
Now i just need to get my hands on a compressor and then this baby will be finished pretty soon.
So excited!!!
End of the month here i come! (i hope)
#27
Posted 20 January 2009 - 12:07 AM

#28
Posted 27 January 2009 - 05:52 PM
Decided to get some sun burn today and work on the mini...
Flatted, puttied, sanded, cleaned, sprayed primer... It's coming along.
Well here are pics thus far:




#29
Posted 28 January 2009 - 03:19 PM
But, as of tomorrow all priming should be complete, then hopefully flatted in a day or 2 then it's time to spray!!!
Went and ordered the paint today which i will be picking up tomorrow. Ford, Diamond white.
Well, this is me holding thumbs that weather wise this week/weekend will be good.
Peace out
#30
Posted 06 February 2009 - 12:00 PM
Well, no updates as of late but i've been busy.
Finished priming and flatting and today i sprayed!
Looks pretty good. Just needs a flat and polish.
Not bad for a backyard open air(save for the gazebo) job i think.
Pics of the car:



I saw the weather on Sky... Terrible, so i thought i'd show you what we're putting up with today:

Peace out!
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users