19 replies to this topic

[twiggy]

On a 1098cc engine with minor fiddling done.
Currently has a stage one backbox but would a motorbike one fit and work, e.g. have enough back pressure blah blah?

Edit: and any pics?

Edited by twiggy, 09 March 2009 - 08:26 PM.

[twiggy]

Am I correct in thinking that with a normal car engine it will actually lose power by doing this?

[Darkscamp]

i run a motorbike exhaust at the mo, sounds great.

[ANON]

i had an old dunstall silencer one one of my old S's and it was fine, if a tad noisy at times !!

[Darkscamp]

i do also have a scorpion race can which i'm looking to fit(e marked so i might get away with it). to get the back pressure on that i'm going to have to put a couple of bends in the pipe.

just try and get one that matches the bore of your link pipe.

Edited by Darkscamp, 09 March 2009 - 08:54 PM.

[twiggy]

i do also have a scorpion race can which i'm looking to fit(e marked so i might get away with it). to get the back pressure on that i'm going to have to put a couple of bends in the pipe.

just try and get one that matches the bore of your link pipe.

Okay, great, cheers for that, filled me with confidence again! Any pics mate?

[Darkscamp]

i do also have a scorpion race can which i'm looking to fit(e marked so i might get away with it). to get the back pressure on that i'm going to have to put a couple of bends in the pipe.

just try and get one that matches the bore of your link pipe.

Okay, great, cheers for that, filled me with confidence again! Any pics mate?

will try and sort out some pics as i dont really have any of the exhaust. might take a few days as its covered in a thick layer of superheated salt at the moment.lol

 malvern0309062_crop.jpg   22.15K   9 downloads
this is the one i'm after next
 stealth.jpg   26.58K   9 downloads

Edited by Darkscamp, 09 March 2009 - 09:13 PM.

[twiggy]

bump, any further contributions? Thought there'd be some old fashioned folk against this

[zebidee]

Mini_boy_ian had (think he was selling it) a Vauxhall engined mini with bike cans. Hopefully he won't mind me popping this on, but just looks amazing !



The infamous 'Pinkle' has one i'm pretty sure aswell, a single where the can exits parallel to the rear valence, can't find a pic though *shuffles through old magazines*

Always wanted to do this too, still do, just toying with the idea of just going for it !

[twiggy]

Mini_boy_ian had (think he was selling it) a Vauxhall engined mini with bike cans. Hopefully he won't mind me popping this on, but just looks amazing !



The infamous 'Pinkle' has one i'm pretty sure aswell, a single where the can exits parallel to the rear valence, can't find a pic though *shuffles through old magazines*

Always wanted to do this too, still do, just toying with the idea of just going for it !

Do it, just gota find a can that sort of fits, maybe weld to an old backbox?

[lowandslow]

The infamous 'Pinkle'

yeah mines got a termignoni carbon ducati pipe off a 748 but they are not cheap (perks of mates who can't keep bikes upright) but i think a stock duke pipe would still look good. it went straight on no pain in the rear pipe bending needed just went on the link pipe and the original ducati fixings screwed straight into the rear valence.

[gibba]

Here a is pic of my Quill racing carbon can. this sounds brilliant and I dont loose any pressure etc with it.

Attached Files

•  DSC00652.JPG   2.13MB   12 downloads

[Ethel]

4 stroke engines don't need back pressure.

[zebidee]

Here a is pic of my Quill racing carbon can

Looks great, did it just join straight to the link pipe? Is the link pipe a 2'' or a 1 7/8''?

Anyone have some vids of a car running with a bike can?

[twiggy]

Would any of these work guys?

http://cgi.ebay.co.u...bayphotohosting

Too stubby?

http://cgi.ebay.co.u...em=220373140003

http://cgi.ebay.co.u...em=160319730868

http://cgi.ebay.co.u...em=180335209022

http://cgi.ebay.co.u...em=200319196149

I have no real preference other than an attractive exhaust with a nice note. These all seem to be off 600cc bikes, that okay? and is the link pipe connection a standard size that would fit a stage one 1275 exhaust?