HI all, if you fit a timing cover with a breather do you need a spacer for the cooling fan
THANKS
Timing Case Cover
Started by
087dave
, Jul 01 2009 07:05 PM
1 reply to this topic
#1
087dave
-
- Members
-
- 952 posts
One Carb Or Two?
- Location: In the living room
Posted 01 July 2009 - 07:05 PM
#2
Cooperman
-
- TMF+ Member
-
- 23,513 posts
Uncle Cooperman, Voted Mr TMF 2011
- Location: Cambs.
- Local Club: MCR, HAMOC, Chelmsford M.C.
Posted 01 July 2009 - 07:09 PM
Some you do and some you don't. If the breather is 'flattened' down the front face, then you shouldn't need a spacer. If it full diameter, then you do. The spacer thickness which seems to work best is 3/8".
Are you fitting a Duplex timing chain? If you are, don't forget to cut away the oil thrower flange inside the timing cover and knock out the detent in the case (if it has one).
Are you fitting a Duplex timing chain? If you are, don't forget to cut away the oil thrower flange inside the timing cover and knock out the detent in the case (if it has one).
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
