hi guys had my mecanic check my mini offer today its better than i thought but he has noticed the gear linkage seal is gone so got order one them but what he has said ask is i am getting him to put a stage 2 head on it and some 1.5 roller tip rockers they are going on a 1275 mini he has said to ask do they do a moddified set off push rods for minis as im chaging to roller tip and do any u guys no if i need to change to a bigger rocker cover?
what Advice Can U Give Me
Started by
darren10_3
, Jul 02 2009 07:07 PM
2 replies to this topic
#2
Bungle
-
- Members
-
- 28,971 posts
Original Spamster
- Location: Cornwall
- Local Club: cornish mini club
Posted 02 July 2009 - 07:25 PM
you don't need to change the push rods (but do keep them in order)
you might have to change the rocker cover depending on what you have now
standard mini ones will hit the new rockers a MG and most after market ones clear
you might have to change the rocker cover depending on what you have now
standard mini ones will hit the new rockers a MG and most after market ones clear
#3
m1tch
-
- Members
-
- 1,044 posts
One Carb Or Two?
Posted 02 July 2009 - 07:51 PM
1.5 rockers on a 1275 should be good 
and it also means you have an excuse to go out and buy another shiny big for the mini 
and it also means you have an excuse to go out and buy another shiny big for the mini
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
