5 replies to this topic

[freaker]

hello,

i whas wondering if anybody could help me wichh extra bolts i need to bolt the conversion lines into my brake calipers.
i'm doing the conversion to metro brakes and whas wondering wich extra bolts i need.
to conntect the other end of the brake line...
as i can't seem to find it anywhere on there site...

freaker

[bmcecosse]

The Metro calipers will be m10x1 thread for the brake pipe connections.
If you mean the bolts that secure the caliper to the hub carrier - then you need special high tensile bolts which have a 10mm shank to suit the caliper - with a 3/8" UNF thread to suit the hub carrier.

[freaker]

but it need to be special bolts with a hole in it to pass the fluid around...

and i can't seem to find it anywhere on their site.

freaker

[bert998]

you need 'banjo bolts'

[crossy71]

These are the Metro pipes for the conversion

You also need 4 of these. if you havent already, pretty costy but they are the proper bolt for the job

Edited by crossy71, 03 July 2009 - 09:09 AM.

[freaker]

thanks for the replys guys,

the thing is on the minisport site you see the 2 extra banjo bolts, they are included in the kit.
but on the minispares you don't see them and they are the same brand goodridge...

thanks for the help

freaker

bert998 you have a pm coming for an interior enquiry...