
Flame Kit
#1
Posted 12 August 2009 - 09:24 PM
!!!watch the video!!!
#2
Posted 12 August 2009 - 09:25 PM
Where did you get it from? How much?
Easy to instal?
#3
Posted 12 August 2009 - 09:26 PM
Could you do a quick step by step please?
For show use only obviously!
#4
Posted 12 August 2009 - 09:27 PM
I'll ask my mate you you can make one.. he was mumbling on about it the other week but i dont listen to him much

EDIT: 555 timer, capacitors resistors and a power transistor.

Edited by mighty mini jack, 12 August 2009 - 09:33 PM.
#5
Posted 12 August 2009 - 09:28 PM
#6
Posted 12 August 2009 - 09:28 PM

#7
Posted 12 August 2009 - 09:29 PM
#8
Posted 12 August 2009 - 09:29 PM
Think you can get the kits off ebay

#9
Posted 12 August 2009 - 09:30 PM
#10
Posted 12 August 2009 - 09:32 PM
#11
Posted 12 August 2009 - 09:34 PM
#12
Posted 12 August 2009 - 09:37 PM
I'm making one if that's all it is though, it sounds simple enough!
#13
Posted 12 August 2009 - 10:32 PM
#14
Posted 12 August 2009 - 11:35 PM
Spark plug in the exhaust with it's own coil then have a switch which switches over the switched feed from the cars coil to the flamer kits coil. Rev it full throttle and flick the switch then the coil for the engine stops firing the spark plugs so loads of un burnt fuel gets shoved down the exhaust and hits the spark plug now sparking in the tail pipe and ignites the fuel mix, VoilĂ big flames! If you do it this way you don't have to worry about running the car rich but you can get the same effect by just having a spark plug igniting in the tail pipe and not bothering about switching off the engines coil but then it does have to be running very rich!
this is basically what weve done, except if you do this and have the engine running a little rich, you get an even bigger flame. Now to try it with the choke out aswell!!!! Oh and to answer a previous question it is quite hard to sort everything out, and rig everything up, however there are kits ive seen which make everything easier and most come with everything except a coil and lead which you can buy for a fiver from the local scrap yard. I'm toying with putting a double gap sparkplug in for a quicker light and even getting a toasting attachment!! lol
#15
Posted 12 August 2009 - 11:45 PM
Could this work?
secondary coil has a 12v feed and shares the ignition coil's earth
Ht lead too spark plug mounted too a boss in the tailpipe
earth too distributor switched
so the action too create flames would be,
turn on secondary coil
rev up engine, hit the switch too kill earth too the distributor
this would kill the ignition sparks, but still give the coil earth pulse
this would enable too create flames without having too run rich.
Orrrrrrr
with the engine running rich, could you just have the secondary coil sharing the earth of the ignition coil?
Ben
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users