Jump to content


Photo
- - - - -

Dropped Battery Acid Eating Up My Seat Rails!


  • Please log in to reply
20 replies to this topic

#16 Rented

Rented

    Speeding Along Now

  • Traders
  • PipPipPipPipPip
  • 488 posts

Posted 11 October 2009 - 11:40 AM

yeah baking soda and boiling water will fix that used it myself loads of times on other cars to

yeah, dont use strong alkalis to neutralise it, as you will get dodgey vapours given off, go for bicarb and lots of water


and what is baking soda? it's just easier to walk into the Asda/Tesco and pick the baking soda off the shelf than to ask for Bicarbonate of soda at the pharmacy. What is easier to get in the supermarket sodium chloride or table salt?


you say tomato i say tomado !
:thumbsup:

#17 Sprocket

Sprocket

    Great on Injection faults

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 7,266 posts
  • Location: Warrington
  • Local Club: Manchester Minis

Posted 11 October 2009 - 11:45 AM

yeah baking soda and boiling water will fix that used it myself loads of times on other cars to

yeah, dont use strong alkalis to neutralise it, as you will get dodgey vapours given off, go for bicarb and lots of water


and what is baking soda? it's just easier to walk into the Asda/Tesco and pick the baking soda off the shelf than to ask for Bicarbonate of soda at the pharmacy. What is easier to get in the supermarket sodium chloride or table salt?



What does it matter? Its the same thing. It even says bicarbonate of soda on the back of the baking soda/ powder packet :thumbsup:

Hot water is not strictly nescisary, but as any school boy will know chemical reaction works faster with heat. Hot water on its own will only dilute the sulphuric acid. It will still be suphuric acid!

Plenty of bicarbonate of soda 'solution', thats the way :D

#18 Dan

Dan

    On Sabbatical

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPipPipPip
  • 21,354 posts

Posted 11 October 2009 - 11:49 AM

It will still be suphuric acid!


Only now it will be hot sulphuric acid, at a lower dilution but still hot acid.

#19 jonny d

jonny d

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,148 posts
  • Location: plymouth
  • Local Club: none

Posted 11 October 2009 - 02:52 PM

got to be neutralised with the bicarb

#20 Ivor Badger

Ivor Badger

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 846 posts

Posted 11 October 2009 - 05:49 PM

yeah baking soda and boiling water will fix that used it myself loads of times on other cars to

yeah, dont use strong alkalis to neutralise it, as you will get dodgey vapours given off, go for bicarb and lots of water


and what is baking soda? it's just easier to walk into the Asda/Tesco and pick the baking soda off the shelf than to ask for Bicarbonate of soda at the pharmacy. What is easier to get in the supermarket sodium chloride or table salt?



What does it matter? Its the same thing. It even says bicarbonate of soda on the back of the baking soda/ powder packet :thumbsup:

Hot water is not strictly nescisary, but as any school boy will know chemical reaction works faster with heat. Hot water on its own will only dilute the sulphuric acid. It will still be suphuric acid!

Plenty of bicarbonate of soda 'solution', thats the way :P


Boiling water dissolves the corrosion faster to clean the thing up.
If you add water to concentrated sulphuric acid, it will get hot anyway. So you always add the sulphuric acid to the water.

#21 Kam

Kam

    Straight to the Point

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 4,140 posts
  • Location: Hampshire
  • Local Club: 16vMini club

Posted 11 October 2009 - 06:39 PM

Blimey thank god I didnt take a blind bit of notice of science at school? Sounds complicated :thumbsup: Yes it was starting to attack the soundproof underneath, carpet has been thrown away and the soundproofing on that side and the marigolds are on standby!

Cheers :P

P.s I love vinegar




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users