14 replies to this topic

[scotty_18]

Hey guys.

I've just put my new cobra bucket seats in (black with grey centre), and i've just ordered black sparco harnesses! woop
I've taken my back seats out, rear seatbelts out too.
I was wondering if anyone has taken their back seats out, or has two front seats with harnesses, could they upload some pictures so i can have a look and get some ideas on what to do to mine? Because i am now stuck

[leaky]

This is my mates MPI.



He's just got 2 bucket seats in the front with harnesses. I don't have any pictures of the seats though.

EDIT.

You can see the seats in these pictures.

Edited by Mini-jon, 28 April 2010 - 05:39 PM.

[benallen]

jon is that tommys car :/) or someone from that other club cus i think ive seen it in reading

[scotty_18]

Thanks for that has he just layed some carpet down over it? because at the moment mine is just the metal showing, wasn't too sure what to do with it.

[Sleepy Stu]

Front stripped out with just buckets




or of course you could go extreme lol

[l_jonez]

mines stripped and carpeted, not the best job in the world but its better than seeing the original red paint

[JamesGodfrey1992]

heres mine :

Attached Files

•  IMG00250_20100317_1442.jpg   483.7K   17 downloads

[JamesGodfrey1992]

sorry i posted in the wrong section :L

[captain kirk]

Heres Mine

[MiniMan65]

I stripped out my carpets today in anticipation of some soundproofing arriving tomorrow and took the opportunity to patch up a bit of brown-ness that was appearing under there before promptly running out of Hammerite! So I'll have to bung a seat back in tomorrow once the parcel is here and nip to B&Q for a bit more so I can give the whole floor a good proper old coat of the stuff and hold off a floor patching job for another year!

[stormintrooper]

Heres Mine

same stereo as me

[ryanill]

hear are mine
the just fiber glass moulds harneses are 3 points and picked up on the old threaded holes for the old seats belts to the left and right of teh seat and the rear i drilled through the parshel shelf and bolted with a large wasjer each side
 fiber_glass_seats.JPG   1.15MB   16 downloads

 IMG_0291.JPG   630.22K   17 downloads

[MiniMan65]

Boy oh boy I don't know how you boys drive like that!

I had to take mine (as it is above +1 seat) out into town today and I could hear every bump, squeak, knock and rattle! Had me so paranoid it was bloody awful!

[l_jonez]

Boy oh boy I don't know how you boys drive like that!

I had to take mine (as it is above +1 seat) out into town today and I could hear every bump, squeak, knock and rattle! Had me so paranoid it was bloody awful!

every bush, bearing, mount etc on my mini is new so theres no squeaks, knocks or rattles. well there could be but the K&N drowns out most noise

[sweetser]

hear are mine
the just fiber glass moulds harneses are 3 points and picked up on the old threaded holes for the old seats belts to the left and right of teh seat and the rear i drilled through the parshel shelf and bolted with a large wasjer each side
 fiber_glass_seats.JPG   1.15MB   16 downloads

 IMG_0291.JPG   630.22K   17 downloads

Id recommend you move your harness mount from the parcel shelf mate, its no way near stong enough to deal with the force of a crash, the mounts will just rip straight out.