Jump to content


Photo

In Car Footage 200bhp Mini!


  • Please log in to reply
22 replies to this topic

#16 minisilverbullet

minisilverbullet

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 3,799 posts
  • Name: Craig
  • Location: Sweden

Posted 29 October 2010 - 06:55 AM

first thought i was watching it in fast forward!

#17 clovus

clovus

    Mini Mad

  • Members
  • PipPipPipPip
  • 231 posts
  • Location: Down under

Posted 29 October 2010 - 07:26 AM

That road looked really narrow! Nice driving, I always find it amazing the co-driver can read out the pace notes, I'd be kakking bricks....

Edited by clovus, 29 October 2010 - 07:26 AM.


#18 mike.

mike.

    Crazy About Mini's

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 6,176 posts

Posted 29 October 2010 - 08:18 AM

Any pics of the car or spec info? Would be interesting to see what sort of suspension and brake setup that it runs.

#19 miniallsort

miniallsort

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 4,723 posts

Posted 29 October 2010 - 12:46 PM

nice video

#20 VCI22

VCI22

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 67 posts

Posted 30 October 2010 - 05:15 PM

Any pics of the car or spec info? Would be interesting to see what sort of suspension and brake setup that it runs.


The suspension is designed and made by Lloyd Hutchinson (the Driver!) He has widened the front track by 80mm (just over 3 inches!) and we are using AVO 3 way adjustable dampers to Lloyd's spec with remote canisters. KAD manufacture and sell this suspension kit which will bolt into any Mini.... just need to drill a few holes in the inner wing, but easy peasy to do! We run heavy duty drive shafts, again to Lloyd's design. His were made by Holfeld F1 - who make shafts for... you guessed it Formula 1 ;-). Brakes are KAD 6 pot with vented discs....can't remember the diameter - DOH!! - but they are big! :dontgetit:) We run 13" Compomotive CXR wheels.
The rear is your "normal" alloy beam axle with KAD alloy rear arms,hubs and KAD's excellent rear disc setup. AVO triple adjustable dampers as per the front!!

All I can say about the suspension is..... WOW!!
Bumps?? What Bumps??? :thumbsup:
Some pics here: http://www.myrally.i... Hutchinson,0,0

#21 VCI22

VCI22

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 67 posts

Posted 31 October 2010 - 06:45 PM

A small clip from outside @ 3:51 on this video
http://www.youtube.c...feature=related

#22 minidream94

minidream94

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,233 posts

Posted 31 October 2010 - 07:36 PM

going to be abit cheeky but how much roughly does a car of this spec cost to make?

also how often do you have to re build the engine?

#23 VCI22

VCI22

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 67 posts

Posted 01 November 2010 - 07:50 AM

going to be abit cheeky but how much roughly does a car of this spec cost to make?

also how often do you have to re build the engine?


Engine has only had a head gasket all year....8 hard rallies... and that was precautionary as leak down test showed slight loss!

The twin of the car in the vid is going up for sale soon for under €28k Euro... approx. £24k stg. Sounds like a lot for a Mini but we are consistently beating cars costing 3/4 times as much to buy and run :errr:

Only difference between the car for sale and the car in the vid is: suspension - two way instead of 3 way and engine spec - 190bhp instead of 201 bhp!!

Obviously the cost of building a brand new version would be higher using all "new" parts etc. Labour being the biggest cost!




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users