4780 replies to this topic

[InstantCustard]

Don't suppose you have any brown interior parts?
I have a brown dash rail that's missing an ashtray.
I'm missing the centres from my door handles(will buy a pair of handles at the right price).
And I wouldn't mind a pair of brown door bins.

[MiniJosh92]

Don't suppose you have any brown interior parts?
I have a brown dash rail that's missing an ashtray.
I'm missing the centres from my door handles(will buy a pair of handles at the right price).
And I wouldn't mind a pair of brown door bins.

No, sorry, I haven't.

[ClitheroeMini]

Have you got any front ends in good condition? i.e. wings, front panel
Cheers
Ben

[MiniJosh92]

Have you got any front ends in good condition? i.e. wings, front panel
Cheers
Ben

I have but, it's a pre 76 front panel.

[ClitheroeMini]

Ah I mines a later model, cheers anyway

[crazirob]

hes a little list mate

Centre Binnicle,
7.5 brake calipers- 2pot/ 4pot not bothered,
MK1 sliding windows glass,
Pedal Box,
Handbrake,
heater matrix,
wiper motors & gears,
brackets to hold up radiator,
internal bonnet release
steering coloumn, with 2 stalks and steering wheel if possible
mini 7 se7en style inlet weber 45,
weber 45 linkage
Headlining struts
central switches on the lower dash rail - moderns,
handbrake quadrants

[MiniJosh92]

What sort of age for pedals, h/brake, etc?

[crazirob]

1974 pickup

Edited by crazirob, 20 January 2013 - 08:42 PM.

[MiniJosh92]

Pm heading your way shortly.

[Duncy H]

1275 engine?
Bucket seats?

[MiniJosh92]

1275 engine?
Bucket seats?

Only got 1275's for re-building or turbos at the moment.
Got a pair of nice old huntmaster bucket seats.

[Duncy H]

Still interested in the 1275s, what are they exactly? I'm preferably after something carb'd and fairly quick! I don't mind doing a rebuild so long as there isn't loads of work needed. What turbo bits you got too?

Edit: I'm going to bingley too

Edited by Duncy H, 21 January 2013 - 01:52 PM.

[GeorgeD]

Hi there,

would you happen to have any 10" mambas, revos, or minilites. Also a 7.5 brake setup and brake servo to suit an 85 car and possibly any stage 1 type bits and bobs.

thanks

George

[MiniJosh92]

Still interested in the 1275s, what are they exactly? I'm preferably after something carb'd and fairly quick! I don't mind doing a rebuild so long as there isn't loads of work needed. What turbo bits you got too?

Edit: I'm going to bingley too

Both the normally aspirated 1275's are A series with remote change boxes. Both not been run for some years. Also got two complete turbo engines.

Hi there,

would you happen to have any 10" mambas, revos, or minilites. Also a 7.5 brake setup and brake servo to suit an 85 car and possibly any stage 1 type bits and bobs.

thanks

George

Pm heading your way.

[Duncy H]

What prices are you after for na engines or torbo engines? Do turbo engines need a rebuild too?