Carbon Lightweight E16se Road Toy
#16
Posted 01 March 2011 - 11:00 PM
#17
Posted 01 March 2011 - 11:11 PM
#18
Posted 01 March 2011 - 11:15 PM
#19
Posted 04 March 2011 - 12:50 PM
#20
Posted 04 March 2011 - 03:01 PM
keep it up (include lots of pics)
#21
Posted 07 March 2011 - 11:39 PM
nice to see you back on it mate,
keep it up (include lots of pics)
Now the winters pretty much behind us expect weekly updates so glad to get back on it as it was getting me down not being able to work on it!
Can't put the camera down.
Only had a day up there as i had a busy last week
Holes welded up, were loads from the boot install! left the bigguns as il just bung grommets in them as i didnt want to fill them with welds and we'll see where my fuel lines are going before etc
Acid etched
Skim of filler on wheel arches
Boot floor was tatty so reflatted and primered up
Then painted back up and everything hammerited! love that stuff but bloody expensive
Want to get the boot floor sealed in now then get the tank and pump sorted and get the boot area in a finished state.
#22
Posted 08 March 2011 - 09:07 AM
#23
Posted 09 March 2011 - 06:44 PM
Misses let me have an extra car day so made good use of it.
passengers floor taken back to bare-metal, few bits of pitting here and there but nothing to get the angle grinder out over only had to cut a section out near to the inner sill but remove a load by where the rear bins used to be.
Bit of carboard always goes down well.
Then a bit of not the best in the world welding would of liked to do it all in one but i fudged up the dimensions aha!
Then lots of acid etch everywhere!
One almost done half floor just need to plate up that other hole and weld on the rollcage plates, bit of seam sealer and im one Happy chappy
Edited by BenH, 09 March 2011 - 06:45 PM.
#24
Posted 09 March 2011 - 08:36 PM
#25
Posted 09 March 2011 - 08:40 PM
hope it comes out looking great mate look like alot of hard works gone into it.Then the passengers side which turned out much better then my passenger side attempt.
#26
Posted 09 March 2011 - 09:13 PM
#27
Posted 09 March 2011 - 10:33 PM
#28
Posted 09 March 2011 - 10:45 PM
#29
Posted 10 March 2011 - 10:01 PM
Edited by george91, 10 March 2011 - 10:01 PM.
#30
Posted 15 March 2011 - 08:29 PM
Finished welding the Passenger side rear floor, Phew!
Seam sealed
Rollcage mounting plate
Arch tidied up
Then managed to get the new doorstep welded on, just needs tidying up etc
Checked door to see if it still fitted, wasnt always a good fit but it still fits , may get another pair anyway
Minging front floor that needs sorting tommorow!
Thats it for now, going back up there tommorw so hopefully il have one half completed floorpan,doorstep sill etc releif!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users