8 replies to this topic

[sjarvis100]

2 sets of alloys both 14"

These are located in Deeping, lincolnshire, near Peterborough
Both £50 could post at cost.
starmags 14" x 6.5"

5 spoke 14" x 7"


starmags have an obvious crack.
 IMG_00921.jpg   248.95K   34 downloads  IMG_00831.jpg   235.12K   13 downloads  IMG_00881.jpg   260.16K   12 downloads  IMG_00901.jpg   167.36K   11 downloads  IMG_00871.jpg   245.13K   17 downloads  IMG_00851.jpg   150.1K   15 downloads  IMG_00841.jpg   193.63K   11 downloads

Edited by sjarvis100, 14 March 2011 - 01:19 PM.

[DFord]

what condition are the 5 spoke in?

[sjarvis100]

what condition are the 5 spoke in?

Personally I would strip them down and repaint, but its up to you.
Thanks

[oli8925]

Are the slots 4x4" pcd? Although I guess the crack is fairly terminal? Was looking for 13x6 but could be tempted...

[ibrooks]

Are either of them 4x4" PCD and are you certain about them being 14"?

What have they been fitted to?

I could possibly be interested in the 5 spokes if they would fit Mini hubs.

Iain

[sjarvis100]

Are either of them 4x4" PCD and are you certain about them being 14"?

What have they been fitted to?

I could possibly be interested in the 5 spokes if they would fit Mini hubs.

Iain

Pretty sure they are 100pcd and came of a metro i think, i will double check later and get back to you. Thanks
stephen

[ibrooks]

100mm is not 4"

What sort of Metro? an Austin Metro has a 4x4"PCD the same as a Mini the later Rover Metro/100 is smaller 3 3/4" from memory which is an older Triumph standard (sort of).

Iain

[oli8925]

Ah, if they're 4x100mm I'll pass.

4x4" is 4x101.6mm.

I also thought the Rover Metro's were 4x100mm but could well be wrong, it's just a feeling.

[sjarvis100]

The 1st set is 100mm

The 2nd set is 105mm

thanks