:!:ok i have had this up as a topic befor . but i have since gone overboard with the motor . things i have done new cams, custom fule rail, 900 hp "200 psi hi flow" fuel pump, custom intake manifold, aftermarket ecu, aftermarket cam gears, 4agze block , big port head , 2x TRD 0.9mm head gaskets "to lower compression", large holset turbo hks bov , hks air filter, 38mm external wastegate, intercooler from a gtx, "room was a factor" , alloy radiator, lightend flywheel, exceedy heavy clutch, balanced crank, larger oil gallerys in crank, new waterpump. stainless headers.aftermarket fuel regulator still alot to do but it is starting to come togeather aiming for apox 200 kw
(260hp) ok axels have been made i have the fiberglass flipfront. i got to to the intercooler pipeing this week and sort out a fuel cell and surge tank. and then add some more braceing to the subframe but this is it at the moment.
photo_3.JPG 1.53MB
129 downloads
photo 2.JPG 3.87MB
60 downloads
photo 3.JPG 3.9MB
58 downloads
Edited by batman, 14 August 2011 - 10:23 AM.