237 replies to this topic

[CLASSIC-MINI-BITS]

Hi yes we have loads of wiper motors available, pm us or call 01274 945001

[RobWill116]

Do you have any 7.5" disc brake set ups or 8.4" driveshafts complete with brakes and calipers?

Thanks

[xtr hardcore]

Any 12" wheels? exhaust sytems (998) rear lights, door cards, headlining?

[CLASSIC-MINI-BITS]

Do you have any 7.5" disc brake set ups or 8.4" driveshafts complete with brakes and calipers?

Thanks

we have many 8.4 sets available, please pm us or call 01274 945001.

[CLASSIC-MINI-BITS]

Any 12" wheels? exhaust sytems (998) rear lights, door cards, headlining?

Hi yes we have all the items you have listed, please call our workshop on 01274 945001 or pm us,

[karl 93]

hi, have you got any chrome interior mirrors and a set of decent chrome wing mirrors that have door fixings; preferably in good condition?

[karl 93]

almost forgot... do you have any door card clips ( enough for both driver and passenger) ?

[Leacho]

have you got late model mini 1996 on front and back seats and a 10inch steering wheel with boss?

[CLASSIC-MINI-BITS]

almost forgot... do you have any door card clips ( enough for both driver and passenger) ?

hi yes we have some, please pm us or call.

[SAP]

Hi

can you advise if you are able to supply the petrol tank support mounting bracket (left hand side tank) it is welded in place
but does not seem to be available as a new part - would need to cut it out of the boot floor? - it is for a 1980's mini await yr advice
and cost..thanks Steve

[CLASSIC-MINI-BITS]

Hi

can you advise if you are able to supply the petrol tank support mounting bracket (left hand side tank) it is welded in place
but does not seem to be available as a new part - would need to cut it out of the boot floor? - it is for a 1980's mini await yr advice
and cost..thanks Steve

we have a few shells available from the scrappage scheme that we can cut sections away from, please call us on 01274 94001 tomorrow to let us know what areas you would like.

[SAP]

Hi

can you advise if you are able to supply the petrol tank support mounting bracket (left hand side tank) it is welded in place
but does not seem to be available as a new part - would need to cut it out of the boot floor? - it is for a 1980's mini await yr advice
and cost..thanks Steve

we have a few shells available from the scrappage scheme that we can cut sections away from, please call us on 01274 94001 tomorrow to let us know what areas you would like.

Many thanks for yr prompt reply - in the mean time I have been able to locate a new part - but I do appreciate yr assistance and helpful reply - Steve

[andyboy!!]

Hi mate

I'm after a nippon rev counter that fits to the speedo and petrol gauge. Posted to UK mainland.

Thanks
Andy

[CLASSIC-MINI-BITS]

yes we have one, how much of it do you need? has yours failed? pm us or call us on 01274945001

[087dave]

Hi, do you have over riders, a boot floor grommet for mpi, blanking plate for back of front seat belt post
and the plate where the brake clutch cylinder go on to

Cherrs