42 replies to this topic

[scubaet]

yes interested, thanks

[scubaet]

Ok, finally after 4 months I have my floor panels from M-Machine.

Now I guess I better figure out how to weld ?!









Door bottom repair LH Mk1-2, Van and Pickup
Door bottom repair RH Mk1-2, Van and Pickup
Door skin LH Mk1-2, Van and Pickup
Door skin RH Mk1-2, Van and Pickup
Bumper rail front panel Mk1-5
1/2 floor in 1960 style with no outer sill LH
1/2 floor in 1960 style with no outer sill RH
Stiffener, A Post LH, Mk1 to 1962
stiffener, A Post RH, Mk1 to 1962
Tunnel, round, Mk1, NOT Remote
Crossmember seat round tunnel Mk1-3
Toe Board Mk1-3
Retaining plate magic wand gaiter to floor
Clamp spare wheel
Boot Floor, Mk1-2
Stiffener wheel arch LH Mk1-5
Stiffener wheel arch RH Mk1-5
Valance, Rear, Mk1-3
Battery cover 2
Battery cover strap
Lens Green Indicator switch end Mk1
Repair panel inner wing Lower, LH
Repair panel inner wing Lower, RH
Bulkhead Repair, LH
Bulkhead Repair, RH, with mounting studs

Attached Files

•  floors1.jpg   298.93K   25 downloads
•  floors2.jpg   309.81K   14 downloads

[Boycie]

That's a lot of fresh metal Good luck, project is really gathering steam now.

[mini-luke]

There's nowt like a stack of panels to motivate/terrify you

[lawrence]

time to get cracking then, ill keep and eye on this project!
L

[miniman_7]

Good luck with this
You got a lot of metal to replace!
I would certainly advocate reading up on bracing the shell before you go chopping all the old stuff out!

[L. Brown]

can I ask what some of the bits cost? did M-machine make the boot floor too? [email protected] thanks

[Daviewonder]

What happened next?

[Hinga]

Hi Elliot,
You have been making a good job in this lovely car.
I have got a 59 mini and I'm looking for some parts. Do you still have the radiator?

Thanks

[scubaet]

Hi Hinga, I may still have a radiator laying around, will check tonight. Followup with me if I don't get back to you.

[scubaet]

Hi Hinga, I located my extra 59 radiator. images are below. Let me know if you are interested.

 0.JPG   27.85K   11 downloads  1.JPG   32.68K   8 downloads  3.JPG   36.09K   10 downloads  4.JPG   30.33K   8 downloads  5.JPG   30.67K   6 downloads  6.JPG   33.3K   7 downloads

[Hinga]

Hi Elliot,

sorry for the delay. Yes, I am interested. How much do you want for it and how much are charges to send it to Portugal?

Does it has some build date written on it?

[Hinga]

Hi,
 

do you still have the radiator? I'm right now in US. This is a great opportunity to buy it as postage cost are quite lower.
 

Regards