27 replies to this topic

[tommc92]

Yeah I'm probably going to take it to the machine shop to be balanced with the crank & clutch
I've already got the washers sorted!

[jaydee]

Definately get the whole lot balanced all together, you wont regret it!
BL manifacturing tolerances were quite big, and with the ultralight flywheel added..better spending some money to have it properly balanced

[tommc92]

Definately get the whole lot balanced all together, you wont regret it!

How much, roughly, is balancing? Definitely going to get it done

[PhilipGCaldwell]

think I paid £85 for mine, Minisport in Burnley did it
definatley recomend it for a revvy 998 with UL fly

Edited by PhilipGCaldwell, 05 December 2011 - 05:53 PM.

[tommc92]

think I paid £85 for mine, Minisport in Burnley did it
definatley recomend it for a revvy 998 with UL fly

That's quite reasonable
Did you give them the whole engine? Or just crank and fly?

[PhilipGCaldwell]

just crank and complete clutch assembly

[tommc92]

Okay cheers I'll try and find somewhere local to do it!

[jaydee]

I payed about 120 for crank/flywheel/rods/pistons, but with a standard A+ crank pulley.
You will notice the difference when the other guys start trashing their big bore engines
Next time i will go for rods lightening aswell..

[tommc92]

I think I'm going to use a morspeed phase 2 cam instead. Already have one so less hassle

[twrminisport]

That wont give you as much as the 276, Not nearly as much
Just so you know

Jesus

[tommc92]

That wont give you as much as the 276, Not nearly as much
Just so you know

Jesus

I know, but it'll get turbo'd next year, so I won't have to get another cam when that happens

Tom

[tommc92]

Got a complete megajolt setup, inc. wiring loom!
All for £150

[PhilipGCaldwell]

£150, very very good price!nice one