ok , i have got hold of a rc40 exhaust & lcb mani , now my car is a 998 auto..
will the mani fit as there is a kickdown linkage to the auto box at the rear ?
i have never done this before to an auto but know from past experience that a lcb is a tight fit on a manual engine/box.....
also , will a alloy inlet fit with the standard carb & kickdown linkage ?
or am i best to seperate the standard inlet from the exhaust mani with a angle grinder ( a mod that i have done in the past to save money !)
im sure somone here as a modded auto :'(
thanks
mark
fitting a LCB ON A AUTO ?
Started by
sirmarky
, Feb 16 2006 11:35 PM
1 reply to this topic
#1
Posted 16 February 2006 - 11:35 PM
#2
Posted 17 February 2006 - 09:07 AM
I had a Mini Sport stage one kit on my automatic. It fitted fine, the carb was very close to the bulkhead with the new inlet manifold, so i required an ultimate engine steady to stop the carb from hitting the bulkhead, but apart from that it was ok....
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users