Could someone perhaps post a picture?
Mg Metro Clutch
Started by
Doz1971
, Apr 01 2012 07:43 PM
17 replies to this topic
#17
Joe555
-
- Members
-
- 240 posts
Mini Mad
Posted 06 April 2012 - 05:45 PM
The bracket has three bolts, two 3/8 unc and one 1/4 unf I think. the 3/8 bolts go into the holes that the none verto slave fitted to and the 1/4 with the spacer goes into the bell housing at right anges (again, I think without going to have a look). then the slave cylinder bolts to the bracket with two 3/8 unf bolts. Thats it , but the bracket is about £18.00
#18
Doz1971
-
- Noobies
-
- 209 posts
Mini Mad
- Location: Gloucestershire
Posted 08 April 2012 - 07:25 PM
A trip to the scrappy provided me with the needed verto bits. Only 2 minor disasters. Sheared a wheel stud off, and the small engine steady bolt in the head. I'll have to drill it out tomorrow. Waiting for a couple of gaskets to turn up and we're away :) Push rod looks ok
Edited by Doz1971, 08 April 2012 - 07:26 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
