New seals do add some resistance to closing the door but should not move the wing. How does the door fit at the front. Is it under flush, over flush or flush with the A panel??
Trouble Closing Door.
Started by
screech
, May 15 2012 12:10 PM
17 replies to this topic
#16
sonikk4
-
- Admin
-
- 16,169 posts
Twisted Paint Polisher!!!
- Name: Neil
- Location: Cotwolds.
Posted 23 May 2012 - 01:58 PM
#17
screech
-
- Members
-
- 3,136 posts
Up Into Fourth
- Location: West Sussex
- Local Club: Bognor rock ya mini & WSMOC
Posted 24 May 2012 - 07:34 PM
This is what I thought.
The door sits flush with the a panel when closed.
Really stuck now don't know what to try next!
Cheers.
The door sits flush with the a panel when closed.
Really stuck now don't know what to try next!
Cheers.
#18
sonikk4
-
- Admin
-
- 16,169 posts
Twisted Paint Polisher!!!
- Name: Neil
- Location: Cotwolds.
Posted 24 May 2012 - 07:55 PM
I really think we need some pictures if possible. Some with the door shut front and back. Picture of the door open looking into the A post area. Also pictures of the seal and if you take the seal off as well some pictures where it fits.
New seals do make the door harder to close but should not flex the wing unless there is something structurally amiss.
New seals do make the door harder to close but should not flex the wing unless there is something structurally amiss.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
