30 replies to this topic

[miniman retford]

AAAAAAGGGGHHHHH He's back !!!!!!!!!!

Thought you'd been banned

Edited by miniman retford, 04 December 2012 - 10:28 AM.

[Ipod]

Me banned...ummm never
So help me with how to change the stop switch lol

[Yoda]

First, remove the neg from the battery, strip down the rear subframe and discard all fixings, remove engine from front subframe and discard, remove front subframe from body and discard, remove all interior from inside car and then remove steering column, remove headlining and discard.

You should now be able to poke your hand behind the wiper motor, pull the switch out with a wiggle and then fit the new one in the reverse order. If the dustmen have already been, go to Minispares to replace all discarded and lost parts, and the final step is to fully restore the rest of the car with all the new parts.

Job done.

Simples.

Can you tell i am in silly mode today?


but seriously, it aint difficult, it can be done without removing the motor but it is easier to pop the motor out and literaly pop one switch out and fit the new one.

Edited by Yoda, 05 December 2012 - 03:43 PM.

[charie t]

Or get a haynes manwell, its a really easy job compared to some on mini's

[miniman retford]

Or an even easier way is to get someone else to do it for you

[Ipod]

and i thought i was the only sarcy one on here...and got a 3 day ban for it a few years back lol....okies cheers all..... wronguns

[charie t]

and i thought i was the only sarcy one on here

Some people think the lowest form of wit is sarcasm, but really, jokes about short people is

[Yoda]

Couldn't resist it. sorry LOL

[miniman retford]

and i thought i was the only sarcy one on here

Some people think the lowest form of wit is sarcasm, but really, jokes about short people is

You having a dig at Shifty ?

[charie t]

Having a dig at shifty would be asking, what's shifty short for?

[Ipod]

Ok ok, got off my interview couch and changed the park/intermitten switch...it only fakin worked....10 to 15 min job in other posts,,,,my butt about an hour faffin around
bought a new loom as others said they corrode, but with the help of a hammer a few screwdivers and a few curses (lots really) i saved the origonal block connector....
all good under the hood

[Yoda]

Nice one Ipod, so you didnt have to strip off the subframes after all!

[Ipod]

Well i started down that route, but the bolts were to tight

[Yoda]

Dont you mean too rusty?

And if you need any instructions for a job in the future, just ask, I will be happy to throw more sarcasm about.

Edited by Yoda, 08 December 2012 - 04:48 PM.

[Realminiman]

and i thought i was the only sarcy one on here...and got a 3 day ban for it a few years back lol....okies cheers all..... wronguns

was that something to do with bmw's .... ;]]