Edited by splintercat, 24 October 2012 - 01:46 PM.
1275Gt Clocks Needle Removal
Started by
splintercat
, Oct 24 2012 01:44 PM
6 replies to this topic
#1
Posted 24 October 2012 - 01:44 PM
Further to the excitement of actually getting genuine 120mph 1275GT clocks I decded to refurbish them as their actual clock faces were really faded and grimey nd reaaly needed tarting up.....HELP for some reason I cant get the needles off of them. I have tried the bent fork trick that is usually employed on the later plastic types but these...white with a metal centre just refuse to budge. ave noticed a pin hole in the centre of the metal centres ( if that makes sense ) does this do anything ?
#2
Posted 27 October 2012 - 06:07 PM
bump.......really am struggling here guys and gals, looked through evry book/mag ever made including War and Peace, to no avail, cant progress with me dash until a HERO appears to help me? Someone, Somewhere knows how to do this......................
#3
Posted 30 October 2012 - 06:14 PM
Well even tried Keith Calver from the Mini Magazine...Even he didn't know so its looks like they are going in the bin and I'll try something else like playing around with an Autoplas dash that I have somewhere with a centre dial set up or I may have to go back to fitting the 110mph 3 clock set up that i started out with...............shame
Edited by splintercat, 30 October 2012 - 06:15 PM.
#4
Posted 30 October 2012 - 07:17 PM
Keep trying with the fork trick. They do come off, like the needles off smiths gauges do. 1275gt clocks are nice, I have some in mine :)
#5
Posted 30 October 2012 - 07:34 PM
WHERES THAT BIN............................. MATE........ did what you said perseverance DOES pay off they finally pinged off ..........with "the old bent fork trick" thank you mate as you reached parts even the great Calver couldn't................refurb here I come.....slobber........
Now thinking about it Ill have to contact you again when they are ready to go in as I think I may a guide as to the wiring at the back as they seem to have 1 male spade and 1 male bullet and 1 female bullet.......whereas I only have 2 wires..one to the male spade and 1 to the male bullet ..how is the other one.....the female bullet connected to?
Now thinking about it Ill have to contact you again when they are ready to go in as I think I may a guide as to the wiring at the back as they seem to have 1 male spade and 1 male bullet and 1 female bullet.......whereas I only have 2 wires..one to the male spade and 1 to the male bullet ..how is the other one.....the female bullet connected to?
Edited by splintercat, 30 October 2012 - 08:35 PM.
#6
Posted 31 October 2012 - 08:47 PM
I'm sure there's a diagram of the 1275gt clock wiring somewhere? Hmm if you need photos, I might be able to help, but depends if my friend still has his!
#7
Posted 02 November 2012 - 12:03 AM
woiuld really appreciate this as the third connector ie female bullet must go somewhere.......
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users