6 replies to this topic

[TehMarchant]

So I guessed that rainwater will get into doors, but how much, mini is filled till the fisrt hole and it had ruined my old door cards and I dont want the same again.

Is this just a thing I should get used to or should i drill a pinhole at the bottom of the door to let it drain?

Attached Files

•  IMAG0153.jpg   49.15K   17 downloads
•  IMAG0152.jpg   46.53K   10 downloads

[rally515]

drill a few holes one in the middle & one at each end..

Do you have the chrome strip on the top of the door skin (outer)?

[TehMarchant]

yeah i have a chrome strip, i will put a pic up and you can judge if i need a new seal there. cheers for the quick responce

Edited by TehMarchant, 23 December 2012 - 01:15 PM.

[TehMarchant]

In the pictures you can see the gaps, will these need fixing or will it be okay?

Attached Files

•  IMAG0154.jpg   25.91K   20 downloads
•  IMAG0155.jpg   45.56K   17 downloads

[Bungle]

your door should already have holes in the bottom of it

just unblock these holes and fit a new membrane between the door and the door card

once we get some warmer weather stick some waxoyl in the bottom, doors rot from the inside out

[alex-95]

you could put ducttape over the holes between the doorcard and door, to stop the water coming through to the doorcards?

[TehMarchant]

you could put ducttape over the holes between the doorcard and door, to stop the water coming through to the doorcards?

That is acctually somthing I will do, that is a good idea.

Okay all tapped up, holes remade, will put the cards back in tomorrow if i can get more clips/pins as some broke and some were missing.

Edited by TehMarchant, 23 December 2012 - 08:05 PM.