Jump to content


Photo
- - - - -

Loti The 91 Rover Cooper Spi


  • Please log in to reply
4 replies to this topic

#1 Ryan n Angela

Ryan n Angela

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 196 posts
  • Location: Ilkeston

Posted 24 August 2013 - 12:26 PM

Project Loti came about after a conversation with a friend at the shooting club. He knew I loved Minis and he knew someone who might be selling a project as it was possible they were going to start a new life down under. After the initial conversation nothing else was said for about 6 months, then one day he gives me a name and number and says give them a call about the mini...

so I do, turns out they are going to Aus, in 4 weeks time and everything including the mini has to go. I go to have a look, fall in love but thankfully my wife has her wits about her and says get Sam to check her over first, next day we do that and sam says "if you dont buy her I will" good enough for me, and negotiations are begun. with advantage to me as I know they need her gone... 3 days later me and sam return with a trailer!

 

[attachment=148313:2012-09-12-1392.jpg]

here she is!

 

hit the road off to Sams house where the restoration will begin

[attachment=148314:2012-09-12-1396.jpg]

dropped off and onto the drive

[attachment=148315:2012-09-12-1401.jpg]

I had to get the trailer back and pick the kids up etc so left her in Sams hands. I kid you not 3 hrs later he is on the phone in loti, revving her up... after 6 years of sitting in a garage as a kids toy! sams a legend.

next day she is on the back yard in the as yet unbuilt workshop... lol

[attachment=148316:IMG_20120914_174357.jpg]

Sam lasted 4 days... 4 days of looking at a mini on his yard before he had to have one of his own...[attachment=148321:Screenshot_2013-08-24-13-14-04-94757327.png]

Say hello to Grommet!

 

for now up goes a massive gazebo as a temporary workshop and things progress at a fare rate of knots... and here I will leave it for now. loads more pics to upload of all we have done so far.

 

TBC and thanks for reading

Ryan



#2 Ryan n Angela

Ryan n Angela

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 196 posts
  • Location: Ilkeston

Posted 24 August 2013 - 02:10 PM

And so the disassembly begins under the massive gazebo

[attachment=148326:2012-09-20-1432.jpg]

get than mini stripped...

#3 Zeemax Adventure

Zeemax Adventure

    Speeding Along Now

  • TMF+ Member
  • PipPipPipPipPip
  • 301 posts
  • Location: Llandudno

Posted 26 August 2013 - 10:33 PM

Well those wings soon came off haha.  Is it a bare shell yet :P



#4 Ryan n Angela

Ryan n Angela

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 196 posts
  • Location: Ilkeston

Posted 27 August 2013 - 08:22 PM

Well those wings soon came off haha.  Is it a bare shell yet :P


Lol. not quite a bare shell but getting there...
[attachment=148441:Screenshot_2013-08-27-20-04-33-11842523206.png]
front panel off.

and then...
[attachment=148442:Screenshot_2013-08-27-20-05-31-1-83666751.png]
Scuttle corner too as underneath is not a pretty sight!

[attachment=148443:Screenshot_2013-08-27-20-05-44-1-1934686312.png]
hole in the very top of the inner wing, right under the closing plate and scuttle

[attachment=148444:Screenshot_2013-08-27-20-05-31-11772155580.png]
and the flitch plate dont look much good either...

[attachment=148445:Screenshot_2013-08-27-20-03-44-11721113794.png]
repairs on top of repairs.

me thinks its time to break out the grinder... more to follow

#5 Ryan n Angela

Ryan n Angela

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 196 posts
  • Location: Ilkeston

Posted 06 September 2013 - 04:25 PM

jumping ahead a bit but... been to work on her today. First time in a couple of months to be honest... finally got the scuttle panel off at last and the rot cut out of the bulkhead! its been a long journey to this point and I back fill the story as I have time. just wanted to get this bit off my chest!!! lol




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users