61 replies to this topic

[AGoaty]

I am breaking my Mini Sprite SPi.

 

Needs sills (which I have got) and 3, 6" square plates making to be solid again.

 

The 1275cc engine did run but was making a tappety noise so would need to be stripped and checked before fitting. Has 130 psi compression on all cylinders. Wanting £150 complete.

 

All the SPi parts are here along with ECU and a good wiring loom. £150

 

I do have a gearbox for it but the main shaft has snapped. It has a good case and has a 2.9 final drive in it. £80

 

Honda seats. £150

 

Black door cards and pockets. £30

 

Black seat belts, inertia type front and rears. £35

 

Walnut 2 clock dash. £75

 

Wood rimmed Mounteny steering wheel. £45

 

Chrome door furniture, SOLD

 

Front subframe needs attention as the legs have broken where the mounts fasten. £30 complete with suspension. No hubs or front brakes.

 

Rear subframe is in decent serviceable condition, complete with suspension and rear brakes. £100.

 

13" alloys with Yokohama tyres. £200 SOLD

 

Need the shell moving now as it's in the way. Bare shell with V5 and new sills, £100

 

Radiator SOLD

 

Chrome door furniture SOLD

 

Edited by AGoaty, 25 February 2014 - 07:30 AM.

[darekforest]

Do you have original seats?

[silve1999]

can you get a pic of the door cards please?

[AGoaty]

I don't have the original seats.

 

These are the door cards, chrome furniture and pockets. I'm wanting £50 for these but think posting will be expensive...

 

 

Here are the Honda seats.

 

 

 

 

You can see the walnut dash with 2 clocks. The Mountney steering wheel is shown but not a good photo of it.

 

The 1275 engine is out and ready for collection. Price reduced to £150.

 

Gearbox case with broken main shaft, 2.9 final drive inc transfer gear, £70

Edited by AGoaty, 17 February 2014 - 08:06 AM.

[mini_mezza]

Pm'd

[mini_mezza]

Also where are you based?

[acrowot]

hi how much for the shell

[AGoaty]

Also where are you based?

 I'm in Keighley, West Yorkshire.

[AGoaty]

hi how much for the shell

For just the bare shell, no glass, no doors, wiring etc, including the V5 and the new sills I bought £150.

[acrowot]

hi dont need sills or v5 really if that would make it any cheapper

[AGoaty]

To be honest the V5 goes with the car. It's up to you to take the responsibility for it. Whether you use it or not is up to you.

 

The sills would go on eBay I suppose but no-one wants to pay for postage on them as it's too high.

 

I do hope you're not in a rush as the car is almost complete. I can strip it this weekend though if thats ok for you.

 

Knock it to £140 just the bare shell and V5.

[AGoaty]

Photo of the Mountney steering wheel.

 

 

 

£50, delivered.

 

Andrew.

Edited by AGoaty, 20 February 2014 - 03:51 PM.

[Erickosrmon Muiruri]

headamps are angel eye???? if so how much for the pair

[AGoaty]

headamps are angel eye???? if so how much for the pair

 

Ah. My son Kyle has swapped them for standard sealed beam units. Sorry not for sale.

[crf150]

Wheels ?