Can you guess what it is yet?
Our Next Project; Pickup
#61
Posted 29 December 2014 - 08:09 AM
Can you guess what it is yet?
#62
Posted 29 December 2014 - 08:32 AM
Not sure Rolf Harris quotes are suitable on a family forum any more!
On another note, That looks about 37% more like a pick up then it when I saw it the other day!
#63
Posted 29 December 2014 - 08:38 AM
Now then, now then, now then,!!
Be careful who's catch phrase you use.
#64
Posted 29 December 2014 - 04:32 PM
#65
Posted 30 December 2014 - 09:15 AM
#66
Posted 30 December 2014 - 07:02 PM
One step nearly done, and front footwell nice. Picture is a mock up to get cab height right for back step.
Engine bay gets some etch primer tomorrow, and no doubt the weldmaster will be cracking on.
Attached Files
#67
Posted 30 December 2014 - 07:16 PM
At last it looks abit like a car. Not just a pile of metal panels
Attached Files
Edited by geoff-d, 30 December 2014 - 07:18 PM.
#68
Posted 02 January 2015 - 08:32 PM
Just the other side to do tomorrow, and fit the panel behind the seats under the window.
Note the picture below is only a mock up, as clearly the weldmaster didn't have his gauntlets on.
Attached Files
#69
Posted 04 January 2015 - 09:35 PM
Didn't get the rear cab panel in today as got stuck on other small repaires. Two steps back one forward at the moment.
#70
Posted 05 January 2015 - 08:41 AM
Didn't get the rear cab panel in today as got stuck on other small repaires. Two steps back one forward at the moment.
Think positive. Lots more rot cut out, and plenty of panels prepped and in etch primer
#71
Posted 05 January 2015 - 09:33 AM
#72
Posted 10 January 2015 - 07:58 PM
A little more progress
Attached Files
Edited by geoff-d, 10 January 2015 - 07:59 PM.
#73
Posted 11 January 2015 - 10:29 PM
& a bit more work on it today
Attached Files
#74
Posted 12 January 2015 - 09:19 PM
Best get on with it as ticket purchased for L2B this yr.
#75
Posted 13 January 2015 - 08:34 AM
Best get on with it as ticket purchased for L2B this yr.
... or buy another mini, just in case.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users