Can some one help please I need to measure from my carb to the front grill
Need to be measured from carb over the bell housing to the grill it's for a cold air feed for my car I have hose at work but I'm guna be off for a week and need to know roughly how much I need cheers
Help Please Need A Measurement
Started by
minilee94
, Jul 28 2014 03:02 PM
Best Answer minilee94 , 28 July 2014 - 03:03 PM
From weber box to just past my oil cooler
Go to the full post
3 replies to this topic
#1
Posted 28 July 2014 - 03:02 PM
#2
Posted 28 July 2014 - 03:03 PM Best Answer
From weber box to just past my oil cooler
#3
Posted 28 July 2014 - 08:38 PM
I can measure anything up to 7 inches but then I'm all out of scope...
Can I ask why you want a cold air feed. I've heard from a few people that it often doesn't do much for performance, and can even decrease air density at the inlet. But by all means give it a go, maybe plumb it into the cold air feed scoop, and ensure that it is a suitable size.
Can I ask why you want a cold air feed. I've heard from a few people that it often doesn't do much for performance, and can even decrease air density at the inlet. But by all means give it a go, maybe plumb it into the cold air feed scoop, and ensure that it is a suitable size.
#4
Posted 28 July 2014 - 08:48 PM
I was just going to run one to get as much air as possible into the carb box and no worries about measuring got it sorted now
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users