4 replies to this topic

[OzCooper93]

Hi Guys,

 

I`m sure this has been covered but I could not find a very useful thread to assist me. I own a lovely Cooper 93` SPI ( pictured ) and although it has a pretty rare black factory dashboard fitted as standard I have always loved the brushed metal ones as rare as they are.

 

To cut a long story short.. I found a new old stock one in Japan and bought it. It come with everything but I cant find fitting instructions anywhere on the web. Also, the actually glovebox is missing but Im hoping once I removal the existing one I can remove that and use it.

 

So.. could anyone help me with a well layout installation process ?

 

Thanks in advance. Garth

Attached Files

•  1001714_10151595873482409_504714858_n.jpg   108.47K   5 downloads

[OzCooper93]

I'm surprised no expects can help me here... Its hard in Australia to get knowledgeable advice on imported Rover Minis... 

[Fast Ivan]

you wont get many on here that would call themselves experts, enthusiastic owners make up the bulk of members I would say.

 

You might get a bit more luck if you post in the problems, questions and technical section rather than in the injection specific section, maybe a few more pics of the dash might help.

I'm sure someone can help.

[jamesmpi]

Not sure if this helps, but look in the body section in this workshop manual

http://www.theminifo...attach_id=68239

[OzCooper93]

Thanks for that Ill have a look though it tonight.