Hi guys,
I am planning to make a B16A vtec conversion to my mini. Thus I need to upgrade the brakes on the car. Can I fit a 9.5" disc under a 13 X 7 wheel? Since I was planning to fit the Honda Civic EG disc brakes from where the engine comes. Is this possible or not?
Thanks
No replies to this topic
#1
SilvanTheuma
-
- Noobies
-
- 1 posts
Starting My Mini Up
- Location: Gozo
Posted 03 September 2014 - 11:17 AM
Also tagged with one or more of these keywords: brakes
Mini Technical Sections →
Problems, Questions and Technical →
Cutaway Section View Of 7.5" Cooper S Caliper?Started by sandman , 01 May 2024  brakes
|
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Adjusting Brake Bias For 7.5" Discs With Pdwa ValveStarted by Daniel Watkin , 16 Nov 2023 brakes
|
|
|
||
 Answered
Mini Technical Sections →
Problems, Questions and Technical →
Fam7821 Brake Limiter Valve - Mounted Upside Down?Started by tarnofsky , 29 Sep 2023 brakes
|
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Kent 286 Can & MotStarted by frosty90 , 07 Sep 2023 brakes
|
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Brake Master Cylinder ReplacementStarted by M I N I , 30 Aug 2023 brakes
|
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
