24 replies to this topic

[MIGLIACARS]

Jim Lyons has just made 281bhp on his boosted 1312cc A-Series running one of my ported heads.
For those on FB, there's some footage on my page Turbo-mini.com
Phil.

at the wheels or fly

[mini13]

flywheel, it was 230 somthing at the wheels (big slicks hence the losses)

 

realistically i can see this cracking 300hp without too much issue, its after a rebuild of the car with some changes, apparently with a new exhaust manifold and some other bits its making that on 8 psi less bost than he used to run. head gasket faliure stopped the mapping session.

Edited by mini13, 19 April 2016 - 09:57 AM.

[bpirie1000]

Thread revival but what is everyone getting these days.

Collecti g bits for my build STILL...

[Spider]

 

,,,,,,realistically i can see this cracking 300hp without too much issue,,,,,,

 

I recall around 2010-ish, SC built one that did 310 Ponies on the rollers. I forget the boost pressure, I * think * it was circa 16 or 20 PSI.

I might have the article.

[MiniMadRacer]

At that sort of power how long do these engines last ?

[Spider]

At that sort of power how long do these engines last ?

 

Longer than the Gearbox

[MiniMadRacer]

lol yes fair point well made

[nicklouse]

 

 

,,,,,,realistically i can see this cracking 300hp without too much issue,,,,,,

 

I recall around 2010-ish, SC built one that did 310 Ponies on the rollers. I forget the boost pressure, I * think * it was circa 16 or 20 PSI.

I might have the article.

 

What about Project 64. 999cc and 300 horses and some.

[Spider]

 

 

,,,,,,realistically i can see this cracking 300hp without too much issue,,,,,,

 

I recall around 2010-ish, SC built one that did 310 Ponies on the rollers. I forget the boost pressure, I * think * it was circa 16 or 20 PSI.

I might have the article.

 

 

I've found the article, but won't post it for Copyright.

It was 310 HP @ 8500 RPM on 22 PSI Boost.

[GraemeC]

 

 

 

,,,,,,realistically i can see this cracking 300hp without too much issue,,,,,,

 

I recall around 2010-ish, SC built one that did 310 Ponies on the rollers. I forget the boost pressure, I * think * it was circa 16 or 20 PSI.

I might have the article.

 

What about Project 64. 999cc and 300 horses and some.

 

 

Didn't realise that used a BMW K head.  For some reason I thought it had a KAD head on it.

Edited by GraemeC, 14 December 2020 - 08:37 AM.