161 replies to this topic

[BLING BLING WHEELZ]

small update 

 

got my ecu for Christmas really good company order it on the friday and received it on the saturday if it wasnt ready to send  on the friday he was going to go in on the saturday to send it as they were off that week as it was christmas week 10/10 company

when i called them up they new exactly what i was on about and said what i will need plugs straight into my z car loom

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

also got my header take off valve sorted got it from honda

also managed to source a electrical plug for my fuel tank the unit in my fuel tanks is a p38 range rover one managed to source a plug from a scrape range rover if you need one of these. if the fuel tank is in the car there is no inspection hatch you will need to cut the floor of the range rover google it you will find what you need on this subject hope this helps

 Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

this is my pump and sender unit

Untitled by william woodhouse, on Flickr

 

also should be ordering my wheels this month pics to come

 

if everything goes to plan should be starting my car for the first time this weekend will post a video if so

[bengreen55]

Hopefully yours will run right mate I am having a nightmare with mine at the min and no one knows what's up with it I am fast losing the will to finish it

[BLING BLING WHEELZ]

Hopefully yours will run right mate I am having a nightmare with mine at the min and no one knows what's up with it I am fast losing the will to finish it

Stick with it will all be worth it when you look back

[BLING BLING WHEELZ]

Have started to fit my wiring looms and tried to start it. when i look none of the loom chassic plug wire colours match up

Could someone please take some photos of there looms to see if there is an issue with mine

Its a k20 with all z cars looms throught

[BLING BLING WHEELZ]

had a bit of a nightmare but have got through that know and am very close to getting it running just need to get some good ridge braided lines a swirl and another pump

 

went to the bingley hall trade fair and bought a few parts

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

few shiny bits 

 

have also bought a hybrid racing pressure regulator, gauge and a fuel rail

 

Untitled by william woodhouse, on Flickr

free bag of haribow as well 

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

the fuel rail

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

with all the connections fitted

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

the old fuel rail

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

finally fitted

Untitled by william woodhouse, on Flickr

 

should have the car running by next weekend cannot wait to hear it run for the first time (:

should be ordering an OBP,

swirl pot

water swirl pot

header tank

and a small oil catch tank for the rocker cover take off

 

as well as all the lines and hose ends

 

[BLING BLING WHEELZ]

got a few more parts through today got my fuel pump and filter and my goodridge hose and some of the connections needed

 

my torques fuel pump kit

 

Untitled by william woodhouse, on Flickr

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

put together 

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

this will be the ruff layout in the car with the pressure regulator

 

Untitled by william woodhouse, on Flickr

 

ordered my fuel swirl pot, header tank and my oil catch tank should have those soon

 

[Luigi33]

Looks promising, I am just in the process of reworking my fuel system so would be interested in your fuel system diagram. Just about to post my proposal on my build thread.

[BLING BLING WHEELZ]

heres a quick pic of my setup any questions on it let me know

 

Untitled by william woodhouse, on Flickr

 

red is return lines and black from pump

 

i had to replace my fuel rail as i could not find a connection to go from braided line to that connection as the are all a set thread on the goodridge connections 

 

[Luigi33]

What have you got planned next?

[BLING BLING WHEELZ]

What have you got planned next?

Tuning?

[cptkirk]

Just a suggestion but I would consider putting the filter (currently post swirl pot and post 2nd pump) in front of the pump, between swirl pot and 2nd pump. that way your pump is seeing clean fuel.

Edited by cptkirk, 20 February 2016 - 08:00 AM.

[BLING BLING WHEELZ]

Got a spark but the injectors do not open and close any ideas?

[BLING BLING WHEELZ]

Got it running for the first time

 

got my swirl pot, header tank and oil catch tank thought

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

made up a bracket to hold the fuel pump and the pressure regulator

 

making the bracket

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

in the car

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

mounting the fuel pump and pressure regulator

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

mounted in the car

 

it is mounted above the rear left hand wheel above the coilover

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

 

the location for the swirl pot and the header tank they are cable tied in to get an idea of what it will look like

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

were i am going to mount the air filter

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

 

does it matter what side you put the t piece for the header tank to connect to?

Untitled by william woodhouse, on Flickr

 

does it have to mounted off the thermostat housing or can it be mounted off the cylinder head valve any advice would be helpfull

[BLING BLING WHEELZ]

got my swirl pot and header tank mounted yesterday

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

were it will be in the car

 

Untitled by william woodhouse, on FlickrUntitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

nut sirted into the car

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

mounted in car

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

mounting the oil catch tank

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

what it will look like it is not yet bolted in as not sure on how flexible the braided house is going to be

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

got a few more parts from demon tweaks

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

using these as a remote jumper point for the battery as it will save me taking the seat out every time i need to charge the car

Untitled by william woodhouse, on Flickr

using these as a through bulkhead connection for the battery terminals as they do not cut against the bulkhead

 

ordering more parts today to finish of the last few bit on the fuel system and some dimple dies to lighten and stiffen the brackets that i have made

[BLING BLING WHEELZ]

got all my fuel fitting through and plumbed in on saturday

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

 

were the connection will go

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

 

making the lines

 

Untitled by william woodhouse, on Flickr

 

 

all plumbed in

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

 

 

would recommend the Bosch 044 pump it hit 80 psi on the gauge untill i turned it down on the regulator

 

have made a light weigh cross member for the minis 

 

 

for sale on eBay if anyone is interest 10 available 

ebay number is        322046601087

 

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr

Untitled by william woodhouse, on Flickr