Mill Road Garage
Posted 18 July 2017 - 08:28 PM
There comes a time in life when you have to admit defeat, and my time came today. The boot floor I've tried to patch using repair panels is bolloxed...
Time to start saving for a full boot floor panel. Gutted
It's so much more worth it.
The cost of the panel is tiny compared to how much time it will save you and the difference in the finished job.
Cheers
Ben
Needs an extra inch!!
Posted 18 July 2017 - 10:03 PM
There comes a time in life when you have to admit defeat, and my time came today. The boot floor I've tried to patch using repair panels is bolloxed...
Time to start saving for a full boot floor panel. Gutted
I thought you were gonna say you were giving up on the project.
I was about to say NOOOOOOOOOO!!
Camshaft & Stage Two Head
Posted 19 July 2017 - 09:55 AM
There comes a time in life when you have to admit defeat, and my time came today. The boot floor I've tried to patch using repair panels is bolloxed...
Time to start saving for a full boot floor panel. GuttedIt's so much more worth it.
The cost of the panel is tiny compared to how much time it will save you and the difference in the finished job.
Cheers
Ben
Thanks Ben, I've given up on the boot floor, looks straightforward enough to fit as well
There comes a time in life when you have to admit defeat, and my time came today. The boot floor I've tried to patch using repair panels is bolloxed...
Time to start saving for a full boot floor panel. Gutted
I thought you were gonna say you were giving up on the project.
I was about to say NOOOOOOOOOO!!
I'm going nowhere Mr Wonder haha
Camshaft & Stage Two Head
Posted 22 August 2017 - 06:24 PM
Had a trip here today because I wasn't paying £40 to have a boot floor delivered by minispares
I got a boot floor and also picked up a rear subframe as well, and there's a sale on, Happy Days
As we went in R kids van it only cost me the price of a fat boy burger from Preston Harley, quids in!!
Looks like we're going to be busy very soon
Up Into Fourth
Posted 22 August 2017 - 06:37 PM
Camshaft & Stage Two Head
Posted 22 August 2017 - 06:40 PM
Put's foolish ideas in peoples heads
Posted 23 August 2017 - 09:33 AM
Subframe is looking nice and shiny!
Camshaft & Stage Two Head
Posted 05 September 2017 - 03:39 PM
Nice one, the kids are back in school today so back on the GT, had literally 2 hours in the garage so this happened.
The plan is tomorrow to roll it over and drill the spot welds on the seat to heel board joint and remove the rest of the floor, then hopefully the whole floor will be in by the end of the week
Needs an extra inch!!
Posted 05 September 2017 - 07:17 PM
Awesome. That will be a nice job to get crossed off the list. 
Camshaft & Stage Two Head
Posted 07 September 2017 - 06:57 PM
Managed a few hours today with R Kid, was held up by a visit to the dentist for a check up that ended up being 45 minutes late, luckily no new metal required. The same can't be said about this!
The holes getting bigger, rolled it over to drill the spot welds on the seat to heel board joint, hoping to get it prepped for the new panel tomorrow, no appointments to get in the way
Speeding Along Now
Posted 07 September 2017 - 07:55 PM
Feel a bit guilty for suggesting the M-Machine repair panels to you, glad
you are now progressing with it , best of luck
Camshaft & Stage Two Head
Posted 07 September 2017 - 08:08 PM
Feel a bit guilty for suggesting the M-Machine repair panels to you, glad
you are now progressing with it , best of luck
Don't be guilty, I should have given the boot floor a good going over with a wire wheel first, it would have saved a whole lot of time. Doing it this way will be a neater job.
It's all a learning curve. As they say you learn from your mistakes. I must be getting clever by now haha
Camshaft & Stage Two Head
Posted 08 September 2017 - 03:05 PM
Well it fits, tried it clamped up with the subframe in place all looked good, but due to an unfortunate mishap with a companion bin it's not welded
Maybe next time eh?
Camshaft & Stage Two Head
Posted 23 September 2017 - 12:57 PM
If I was my boss I'd be sacking myself because my garage was a disgrace so had a tidy up. Then ordered a companion bin from minispares because minisport had none in stock, and then Sat Nav gave me this box of goodies
Happy days, I think my neighbours my be a little upset Monday teatime haha
One Carb Or Two?
Posted 25 September 2017 - 09:14 AM
Hi,
i'm replacing my boot floor too and i'm about at the same stage as you are.
does anyone know how to get the rear subframe mount area at the correct height ? does it involve using the two holes on the rear wheel arch lip ? there must be a way to get it spot on. If one side is slightly higher then the car won't sit straight.
Pete.
0 members, 0 guests, 0 anonymous users
