935 replies to this topic

[GraemeC]

Or make some headed paper for Hubba.Hubba Motors Ltd......

[HUBBA.HUBBA]

Looking to install an expansion tank but with the charger and fuel filter there isn't much room. I have been looking for months to find something appropriate but all I can find is a picture off an Audi form. Just looking for a simple set up with 1 inlet/outlet on the bottom, just like in the picture.  005-1.jpg   29.87K   1 downloads
If anyone knows were to get one please let me know. cheers

[MrBounce]

It looks like it has an outlet at the top rather than the bottom, but would this be any good?

 

https://www.carbuild...ion-tank-075ltr

[nicklouse]

pressurised or not`?

 

and connected to where?

[HUBBA.HUBBA]

It looks like it has an outlet at the top rather than the bottom, but would this be any good?
 
https://www.carbuild...ion-tank-075ltr

Seen that. Too big.

[HUBBA.HUBBA]

pressurised or not`?
 
and connected to where?

Pressurised. Would connect to rad and change rad cap to unpressurised

[HUBBA.HUBBA]

Ideally I'd like a set up like a moke with a pressurised cap on bottle, but the bottle is too big

[Ethel]

I find Ebay is great for random part hunting, I think mines off a Clio and you can get pressure caps on the side of a length of pipe.

 

How about a bikes or moped for small

[HUBBA.HUBBA]

Think I'm going to get concept racing to make a small version of this.
 PH002REARMOUNT-325x250 (1).jpg   18.7K   1 downloads

[HUBBA.HUBBA]

Now the MOT is done,I can potter more. So did the wing mirrors.  20180825_154105_resized.jpg   28.59K   0 downloads  20180825_154111_resized.jpg   22.64K   0 downloads  20180825_171040_resized.jpg   60.88K   0 downloads

Being a home made car with a supercharger thought I'd stick on a fire extinguisher.
 20180825_171101_resized.jpg   92.07K   1 downloads

Raised the front suspension up a bit.
 20180825_170926_resized.jpg   58.1K   1 downloads

And put on the sump guard. Think I'll spray it Sandy (surprise,surprise!)

 20180825_171030_resized.jpg   40.81K   1 downloads

[HUBBA.HUBBA]

Does anyone know of wheel nuts with an over sized mating area. The holes on my jbw pepper pot steel wheels are massive compared to the stud and are too close to the edge of the nut for my liking. Or perhaps a thick washer?  20180826_184632_resized.jpg   23.14K   2 downloads
You can see the line that has taken off the paint

[MacGyver]

http://m.minispares....~shop/NAM9075MS
Would these do?
My brother had the same as you and eventually pulled thru his rim, his rims where alloy tho.

Ben

[HUBBA.HUBBA]

http://m.minispares....~shop/NAM9075MS
Would these do?
My brother had the same as you and eventually pulled thru his rim, his rims where alloy tho.

Ben

It's hard to see without comparing the 2

[nicklouse]

 

http://m.minispares....~shop/NAM9075MS
Would these do?
My brother had the same as you and eventually pulled thru his rim, his rims where alloy tho.

Ben

It's hard to see without comparing the 2

 

wrong seat.

 

what wheel brand?

[nicklouse]

i think you have the wide seat ones already 

http://www.minispare...MS.aspx|Back to

 you may need to look at some non mini ones IE: not 11/16 socket fitting but the same thread.