Looks like the cam is gona have to come out!
Distributor Drive Installation.
Started by
scoop-face
, Dec 22 2019 01:28 PM
16 replies to this topic
#17
scoop-face
-
- Noobies
-
- 21 posts
Learner Driver
- Location: Birgham
Posted 21 February 2020 - 08:18 AM
Hey guys.. update on my progress!
After removing the cam and getting a good look with the inspection lamp and trial fitting the dizzy drive, while looking through where the cam is inserted. It became clear that something in the block was stopping the drive being inserted. I got a 1/2 inch drill bit and lightly worked the slot by hand. reinstalled the cam and dizzy drive and now it all marries up nicely!
Must have been a small sharred of metal on the lip of the slot stopping the drive from slotting in.
Hope this makes sense!
After removing the cam and getting a good look with the inspection lamp and trial fitting the dizzy drive, while looking through where the cam is inserted. It became clear that something in the block was stopping the drive being inserted. I got a 1/2 inch drill bit and lightly worked the slot by hand. reinstalled the cam and dizzy drive and now it all marries up nicely!
Must have been a small sharred of metal on the lip of the slot stopping the drive from slotting in.
Hope this makes sense!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
