4 replies to this topic

[FLOSS_81]

Hi Guys i,m Chris from Plymouth UK, new here and my first time with forums so you might need to educate me a bit.

 

Ive just purchased a MK1 (very excited) with a nasty scuff down the side. So i need to source some panels. My first hunt was minispares obviously but i see they are out of stock of quarters... any other ideas or stuff kicking about.

 

Is the MK3 the same shape/curve?

 

I appreciate any help people have.

 

 

 

[sonikk4]

Hi and welcome,

 

try M Machine but ring them, do not email them. They very rarely if ever answer them. Doreen who normally picks the phone up is very knowledgeable.

 

http://preview.m-machine.co.uk/

[mab01uk]

The Mk3 door aperture shape is a different size and shape so the front edge of the Mk3 rear quarter panel is a different shape where it meets the door B post to the Mk1 and Mk2.

[Daz1968]

You can use mk3 quarters, they just need to be trimmed and joined behind the b post, depends where the damage is. 
 

10256932-6F8C-4A4B-8470-E0132EDFFF66 by darren carr, on Flickr

[humph]

As above try M-machine. Section 140 of their catalogue shows Mk1-2 panels available.